Worx LANDROID L WG797E Lawn Mower Manual

The Worx LANDROID L WG797E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. It features a cutting width of 18 cm, a cutting height adjustable from 20 to 60 mm, and can handle lawns up to 700 m². The mower is equipped with a rain sensor, anti-theft alarm, and Wi-Fi connectivity for remote control and scheduling via the Worx app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, anti-theft alarm, Wi-Fi connectivity.

Feature	Description
Cutting Width	18 cm for efficient mowing
Cutting Height	Adjustable from 20 to 60 mm
Area Coverage	Handles lawns up to 700 m²
Rain Sensor	Automatically returns to charging station in rain
Anti-Theft Alarm	Alerts if the mower is moved without authorization
Wi-Fi Connectivity	Control and schedule mowing via the Worx app

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

Install the boundary wire: Outline the area to be mowed.
Connect the charging station: Plug it into a power outlet.
Ensure the mower is charged before first use.

WARNING! Ensure the boundary wire is securely placed to avoid damage.

First-Time Setup

Power on the mower and follow the app instructions for setup.

Download the Worx app and create an account.
Connect the mower to your Wi-Fi network.
Set your mowing schedule through the app.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Model: Worx LANDROID L WG797E
Cutting Width: 18 cm
Cutting Height: 20-60 mm adjustable
Area Coverage: Up to 700 m²
Battery: Lithium-ion, 20V
Charging Time: Approximately 90 minutes
Weight: 9.5 kg
Operating Temperature: 0°C to 40°C

Controls and Settings

Access settings via the Worx app or the control panel on the mower.

Control Panel: Power button, manual control buttons, status indicators.

Settings: Mowing schedule, cutting height adjustment, and Wi-Fi settings.

Connecting Devices

Connect the mower to your home Wi-Fi for remote access.

Ensure the mower is powered on.
Follow the app instructions to connect to Wi-Fi.
Test the connection by accessing the mower through the app.

Tip: Keep your Wi-Fi router within range for optimal performance.

Operating the Mower

Start mowing by scheduling through the app or using the manual controls.

Press the power button to turn on.
Use the app to start mowing or set a schedule.
Monitor the mowing progress through the app.

WARNING! Keep pets and children away from the mowing area.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower after each use.
Check and replace the blades as needed.
Inspect the boundary wire for damage.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Do not operate in wet conditions.
Keep the area clear of obstacles.
Ensure children and pets are indoors during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
No cutting action	Blade issue	Inspect and replace blades if necessary.
Boundary wire not detected	Installation issue	Check boundary wire connections and layout.
Mower stops unexpectedly	Obstacle detected	Clear the area of obstacles and restart.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.