Worx LANDROID L WG798E Lawn Mower Manual

The Worx LANDROID L WG798E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced features such as GPS navigation, smart mapping, and a powerful battery, it can handle lawns up to 1/4 acre. The mower is equipped with a rain sensor, adjustable cutting height, and a user-friendly app for remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: GPS navigation, rain sensor, adjustable cutting height, user-friendly app, and powerful battery.

Feature	Description
GPS Navigation	Allows efficient mapping and mowing of your lawn.
Rain Sensor	Automatically returns to the charging station during rain.
Adjustable Cutting Height	Customize the cutting height for your lawn's needs.
User-Friendly App	Control and monitor your mower remotely.
Powerful Battery	Provides up to 90 minutes of mowing on a single charge.

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

Install the boundary wire: Lay the wire around the perimeter of your lawn.
Connect the charging station: Plug it into a power outlet and ensure it is secure.
Test the boundary: Make sure the mower can detect the wire.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the app instructions for setup.

Download the Worx app: Available on iOS and Android.
Connect to Wi-Fi: Follow prompts to connect the mower to your home network.
Set mowing schedule: Customize the days and times for mowing.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 7 inches.
Battery: 20V Lithium-Ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 90 minutes on a full charge.
Weight: 20 lbs.
Cutting Height: Adjustable from 1.5 to 4 inches.
Area Coverage: Up to 1/4 acre.

Controls and Settings

Access mower settings via the app. Key controls include start/stop, schedule settings, and cutting height adjustments.

Remote Control: Use the app to control the mower from anywhere.

Connecting to the App

Ensure your mower is powered on and within range of your Wi-Fi network.

Open the Worx app and create an account.
Follow the prompts to add your mower to your account.
Customize settings as needed.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start the mowing process through the app or manually using the start button.

Ensure the area is clear of debris.
Start the mower: Use the app or press the start button on the mower.
Monitor the mowing process via the app.

WARNING! Do not approach the mower while it is in operation.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower: Remove grass clippings and debris after each use.
Check blades: Inspect and replace blades as needed.
Update software: Keep the mower's software up to date via the app.

CAUTION! Always power off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Mower stops unexpectedly	Boundary wire issue	Inspect boundary wire for breaks or disconnections.
Uneven cutting	Blade issue	Inspect and sharpen or replace blades as necessary.
App connection issues	Wi-Fi signal	Ensure mower is within range of the Wi-Fi signal.

Reset: Use the app to reset settings if necessary.

Service: Contact customer support for further assistance.