Worx LANDROID M WG754E Lawn Mower Manual

The Worx LANDROID M WG754E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With a cutting width of 18 cm and a maximum cutting area of 500 m², it features a powerful battery, smart navigation, and customizable mowing schedules. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mowing Operations 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, remote control, smart navigation system.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and returns to the charging station.
Weatherproof Design	Operates in various weather conditions, including rain.
Customizable Mowing Schedule	Set specific days and times for mowing.
Boundary Wire	Defines the mowing area to prevent the mower from going outside designated zones.
Remote Control	Allows manual operation and adjustments from a distance.

Installation

Unpack and inspect contents. Set up the charging station in a shaded area.

Lay out the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.
Test the boundary wire to confirm the mowing area is defined correctly.

WARNING! Ensure the area is clear of debris before installation.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Set the current date and time.
Program the mowing schedule according to your preferences.
Adjust cutting height using the settings menu.
Perform a test run to ensure proper operation.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 18 cm.
Maximum Cutting Area: 500 m².
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Weight: 9.5 kg.
Noise Level: 60 dB.
Operating Temperature: 0°C to 40°C.

Controls and Settings

Access settings via the onboard display or mobile app. Key controls include power, start/stop, and manual navigation.

Mobile App: Allows remote monitoring and scheduling from your smartphone.

Connecting Devices

Connect the mower to Wi-Fi for app functionality.

Ensure the mower is powered on.
Follow the app instructions to connect to your home Wi-Fi network.
Test the connection by accessing the mower settings via the app.

Tip: Keep the mower within range of the Wi-Fi signal for optimal performance.

Mowing Operations

Supports various mowing patterns and schedules.

Start mowing: Press the start button or use the app.
Adjust mowing height as needed.
Monitor battery level and return to charging station when low.
Stop mowing: Press the stop button or use the app.

WARNING! Do not attempt to manually move the mower while it is operating.

Accessibility Features

Voice commands available through the mobile app for hands-free operation.

Care & Cleaning

Regularly clean the mower and charging station. Use a dry cloth only; no liquids or aerosols.

CAUTION! Ensure the mower is powered off before cleaning.

Regulatory Information

This device complies with FCC Part 15. For support, visit www.worx.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Boundary wire not detected	Improper installation	Check the boundary wire for breaks and proper layout.
Mower stops unexpectedly	Obstacles or stuck	Clear the area of obstacles and restart.
App connection issues	Wi-Fi signal	Ensure the mower is within range of the Wi-Fi signal.

Reset: Refer to the app for reset options if needed.

Service: For assistance, contact customer service at 1-800-555-0199 or visit www.worx.com.