Worx LANDROID M WG756E Lawn Mower Manual

The Worx LANDROID M WG756E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With its intelligent navigation system, it can handle lawns up to 1/4 acre, cutting grass efficiently while avoiding obstacles. The mower features a weatherproof design, adjustable cutting height, and a user-friendly app for remote control and scheduling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, user manual, app connectivity.

Feature	Description
Intelligent Navigation	Maps your lawn for efficient mowing
Weatherproof Design	Operates in various weather conditions
Adjustable Cutting Height	Customizable grass length settings
Remote Control	Control via smartphone app
Boundary Wire	Defines mowing area
Safety Sensors	Stops blades when lifted
Rechargeable Battery	Long-lasting power for extended use

Installation

Unpack and inspect contents. Set up the charging station in a shaded area.

Install boundary wire: Follow the layout for your lawn.
Connect the charging station: Plug into a power outlet.
Ensure the mower is charged before first use.

WARNING! Ensure boundary wire is properly installed to avoid damage.

First-Time Setup

Power on the mower; follow the app prompts for setup.

Download the Worx app: Available on iOS and Android.
Connect to Wi-Fi: Follow in-app instructions.
Set mowing schedule: Customize according to your lawn needs.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 20 lbs.
Cutting Height: Adjustable from 1 to 3 inches.
Area Coverage: Up to 1/4 acre.

Controls and Settings

Access settings via the app or onboard controls. Key functions include start/stop, scheduling, and cutting height adjustment.

App Features: Remote control, mowing history, and maintenance reminders.

Connecting to the App

Ensure the mower is powered on and within range of your Wi-Fi network.

Open the Worx app and create an account.
Follow the prompts to connect your mower.
Customize settings and schedules through the app.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start mowing by pressing the start button or via the app.

Monitor mowing progress through the app.
Return to charging station when battery is low.
Adjust settings as needed for optimal performance.

WARNING! Do not obstruct the mower while in operation.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower and blades after each use.
Check battery health periodically.
Replace blades as needed for effective cutting.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
App connection issues	Wi-Fi signal weak	Move closer to the router.
Mower stops mid-operation	Boundary wire issue	Check boundary wire for breaks.

Reset: Refer to the app for reset instructions if needed.

Service: Contact customer support for further assistance.