Worx LANDROID M WG758E Lawn Mower Manual

The Worx LANDROID M WG758E is an advanced robotic lawn mower designed for efficient and precise lawn care. It features a cutting width of 20 cm, adjustable cutting height, and is capable of navigating complex garden layouts. With its intelligent navigation system, it can handle slopes up to 35%, making it suitable for various terrains. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and complex garden layouts.
Adjustable Cutting Height	Allows customization of grass length from 20mm to 60mm.
Weatherproof Design	Operates in light rain; designed for outdoor use.
Remote Control	Control the mower via smartphone app or remote.
Anti-Theft System	Includes a PIN code for added security.

Installation

Unpack and inspect contents. Set up the charging station in a dry, shaded area.

Lay boundary wire around the mowing area to define the operating zone.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.
Test the boundary wire for proper operation.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow on-screen prompts to configure settings.

Set the desired cutting height using the control panel.
Program the mowing schedule via the app or control panel.
Test the mower's operation in a small area before full use.

CAUTION! Ensure the boundary wire is correctly installed to avoid issues.

Specifications

Cutting Width: 20 cm.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 9.5 kg.
Noise Level: 60 dB.
Maximum Slope: 35%.
Dimensions: 54 x 36 x 20 cm.

Controls and Settings

Access settings via the control panel or mobile app. Key controls include power on/off, cutting height adjustment, and scheduling options.

Remote: Use the app for remote control and monitoring.

Settings include mowing schedule, cutting height, and boundary wire configuration.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote control.

Download the Worx app on your smartphone.
Follow the app instructions to connect the mower to Wi-Fi.
Ensure the mower is within range of the Wi-Fi signal.

Tip: Keep the app updated for the best performance.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

Press the power button to turn on the mower.
Set the mowing schedule via the app or control panel.
Monitor the mower's operation through the app.

WARNING! Do not attempt to operate the mower in heavy rain or extreme conditions.

Maintenance

Regular maintenance ensures optimal performance. Clean the mower and check blades regularly.

Remove grass clippings from the mower after each use.
Inspect and replace blades as needed.
Check the boundary wire for any damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

WARNING! Do not operate the mower without proper supervision.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Uneven cutting	Blades dull	Inspect and replace blades as necessary.
Boundary wire issues	Wire damaged	Inspect the wire for breaks and repair as needed.
Mower stuck	Obstacles in the way	Clear the area and restart the mower.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.