Worx LANDROID M WG790E Lawn Mower Manual

The Worx LANDROID M WG790E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. It features advanced navigation technology, a powerful battery, and customizable cutting schedules. With its ability to handle slopes and narrow passages, the LANDROID M ensures a perfectly manicured lawn with minimal human intervention. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, remote control, and app connectivity.

Feature	Description
Robotic Mower	Autonomously mows your lawn without human intervention.
Charging Station	Automatically returns to the station to recharge.
Boundary Wire	Defines the mowing area to keep the mower within limits.
Remote Control	Allows manual control of the mower when needed.
App Connectivity	Control and schedule mowing via smartphone app.

Installation

Unpack and inspect contents. Set up the charging station and boundary wire.

Choose a suitable location for the charging station.
Install the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Follow installation instructions carefully to avoid damage.

First-Time Setup

Power on the mower and follow the app instructions for setup.

Download the Worx app and create an account.
Connect the mower to your Wi-Fi network.
Set your mowing schedule through the app.
Test the mower in a small area before full operation.

CAUTION! Ensure the boundary wire is correctly placed before starting.

Specifications

Cutting Width: 7 inches.
Battery: 20V Lithium-Ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Cutting Height: Adjustable from 1.5 to 4 inches.
Weight: 20 lbs.
Maximum Slope: 20 degrees.

Controls and Settings

Access settings via the app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings: Adjust cutting height, schedule mowing times, and check battery status.

Connecting Devices

Connect the mower to your smartphone via the Worx app.

Ensure the mower is powered on and within range of your Wi-Fi.
Follow the app instructions to connect.
Update firmware if prompted for optimal performance.

Tip: Keep the app updated for new features and improvements.

Operating the Mower

Start the mower using the app or the control panel.

Press the power button to turn on.
Set the desired mowing schedule through the app.
Monitor the mower's progress via the app.
Ensure the boundary wire is intact during operation.

WARNING! Keep children and pets away from the mowing area during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for damage regularly.
Store the mower indoors during harsh weather conditions.
Update the app and firmware as needed.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep the mowing area clear of obstacles.
Do not operate in wet conditions.
Ensure children and pets are indoors during operation.
Follow all local regulations regarding robotic mowers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Uneven cutting	Blades dull	Sharpen or replace blades as needed.
Boundary wire not detected	Wire damage	Inspect and repair boundary wire.
Mower stops unexpectedly	Obstacles or low battery	Remove obstacles and recharge battery.

Reset: Refer to the app for reset instructions if needed.

Service: Contact customer support for further assistance.