Worx LANDROID M WG791E Lawn Mower Manual

The Worx LANDROID M WG791E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can efficiently mow areas up to 1/4 acre, handle slopes up to 20 degrees, and navigate narrow passages with ease. The mower features a weatherproof design, programmable cutting schedules, and a mobile app for remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, weatherproof design, mobile app connectivity.

FeatureDescription
Robotic MowerAutomated mowing with minimal human intervention
Boundary WireDefines the mowing area to prevent the mower from leaving the lawn
Weatherproof DesignOperates in various weather conditions
Mobile AppControl and schedule mowing from your smartphone
Programmable SchedulesSet specific days and times for mowing
Obstacle DetectionAutomatically navigates around obstacles
Rechargeable BatteryLong-lasting battery for extended mowing sessions

Installation

Unpack the mower and charging station. Follow the steps below for installation.

  1. Choose a suitable location for the charging station.
  2. Install the boundary wire around the mowing area.
  3. Connect the charging station to a power source.
  4. Ensure the mower is charged before first use.

WARNING! Ensure the boundary wire is installed correctly to avoid damage to the mower.

First-Time Setup

Power on the mower and follow the on-screen prompts.

  1. Connect to Wi-Fi: Use the mobile app to connect the mower to your home Wi-Fi network.
  2. Set mowing schedule: Program the days and times for mowing.
  3. Adjust cutting height: Set the desired cutting height using the app or control panel.

CAUTION! Ensure the area is clear of obstacles before starting the mower.

Specifications

Controls and Settings

Access settings via the mobile app or control panel on the mower. Key controls include power, start/stop, and cutting height adjustment.

Mobile App: Provides remote control, scheduling, and monitoring features.

Connecting to the App

Download the Worx app from your device's app store. Follow the instructions to connect your mower.

  1. Open the app and create an account.
  2. Follow the prompts to add your mower.
  3. Connect to your home Wi-Fi network.

Tip: Ensure your smartphone is connected to the same Wi-Fi network.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is installed correctly. Use the app or control panel to initiate mowing.

  1. Press the start button or use the app to begin.
  2. Monitor the mower's progress via the app.
  3. Return to the charging station when mowing is complete.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

  1. Clean the mower after each use.
  2. Check and replace blades as needed.
  3. Inspect the boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully before use.
Uneven cuttingBlades dullSharpen or replace blades as necessary.
Mower not returning to stationBoundary wire issueCheck boundary wire for breaks or improper installation.
App not connectingWi-Fi issueEnsure mower is within Wi-Fi range and restart the app.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.

Worx LANDROID M WG791E Lawn Mower Manual © - All Rights Reserved 2026