Worx LANDROID M WG796E Lawn Mower Manual

The Worx LANDROID M WG796E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 1/4 acre, cutting grass efficiently while avoiding obstacles. Key features include programmable cutting schedules, rain sensors, and a mobile app for remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, rain sensor, mobile app connectivity.

Feature	Description
Programmable schedules	Set specific days and times for mowing
Rain sensor	Automatically returns to charging station during rain
Mobile app	Control and monitor mower remotely
Boundary wire	Defines the mowing area
Obstacle detection	Avoids obstacles while mowing
Adjustable cutting height	Customize grass cutting height
Quiet operation	Operates quietly for minimal disturbance

Installation

Unpack and inspect contents. Set up the charging station in a dry, shaded area.

Lay out the boundary wire around the mowing area.
Connect the charging station to a power outlet.
Ensure the mower is charged before first use.
Test the boundary wire to confirm the mowing area is defined.

WARNING! Ensure the area is clear of debris before mowing.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Connect to Wi-Fi: Use the mobile app to connect the mower to your home network.
Set mowing schedule: Program preferred days and times for mowing.
Adjust cutting height: Set the desired height for grass cutting.
Test the mower: Run a test cycle to ensure proper operation.

CAUTION! Keep pets and children away during operation.

Specifications

Cutting Width: 7 inches.
Battery: 20V lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 20 lbs.
Cutting Height Range: 1.5 to 3.5 inches.
Area Coverage: Up to 1/4 acre.
Noise Level: 60 dB.

Controls and Settings

Access settings via the mobile app or the control panel on the mower. Key controls include power, start, stop, and manual mode.

Mobile App: Provides remote control, scheduling, and monitoring features.

Settings: Adjust cutting height, mowing schedule, and boundary settings through the app.

Connecting to the App

Download the Worx app from the App Store or Google Play. Follow the instructions to connect your mower.

Open the app and create an account.
Follow the prompts to add your mower.
Connect to your Wi-Fi network.
Customize settings through the app.

Tip: Ensure your smartphone is connected to the same Wi-Fi network as the mower.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

Press the power button to turn on the mower.
Use the app to start the mowing cycle.
Monitor the mower's progress via the app.
Return to the charging station when mowing is complete.

WARNING! Do not attempt to lift or move the mower while it is operating.

Maintenance

Regular maintenance ensures optimal performance. Follow these guidelines:

Clean the mower blades after each use.
Check and replace the boundary wire if damaged.
Inspect the charging station for debris.
Store the mower indoors during winter months.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep the area clear of obstacles, and do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Boundary wire not detected	Wire damaged	Inspect and replace boundary wire if necessary.
Mower stops unexpectedly	Rain sensor activated	Wait for dry conditions before resuming.
Uneven cutting	Blades dull	Sharpen or replace mower blades.
App connection issues	Wi-Fi problems	Check Wi-Fi connection and restart the app.

Reset: Use the app to reset mower settings if needed.

Service: For support, contact Worx customer service.