Worx LANDROID M WG799E Lawn Mower Manual

The Worx LANDROID M WG799E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 1/4 acre, cutting grass efficiently while avoiding obstacles. The mower features a weatherproof design, programmable cutting schedules, and a mobile app for remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, mobile app, weatherproof design.

Feature	Description
Robotic Mower	Autonomously mows your lawn without human intervention.
Boundary Wire	Defines the mowing area to keep the mower within designated limits.
Mobile App	Control and schedule mowing from your smartphone.
Weatherproof Design	Operates in various weather conditions.
Obstacle Detection	Automatically avoids obstacles in its path.
Programmable Schedule	Set specific mowing times for convenience.
Rechargeable Battery	Returns to charging station when battery is low.

Installation

Unpack and inspect contents. Set up the charging station and boundary wire.

Choose a location for the charging station that is close to a power outlet.
Lay the boundary wire around the area you want to mow, ensuring it is securely fastened.
Connect the charging station to power and test the mower's connection.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower; follow the app prompts for initial setup.

Download the Worx app and create an account.
Connect the mower to your Wi-Fi network.
Set your lawn size and mowing schedule in the app.
Test the mower's operation by starting a mowing session.

CAUTION! Ensure the boundary wire is correctly installed before operation.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Cutting Height: Adjustable from 1.5 to 4 inches.
Weight: 20 lbs.
Noise Level: 60 dB.
Connectivity: Wi-Fi enabled for app control.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Mobile App: Start/stop mowing, set schedules, adjust cutting height.

Manual Controls: Power button, start/stop button, and emergency stop.

Connecting Devices

Connect the mower to your home Wi-Fi for remote control.

Ensure your smartphone is connected to the same Wi-Fi network.
Follow the app instructions to connect the mower.
Test the connection by starting a mowing session from the app.

Tip: Keep the app updated for optimal performance.

Operating the Mower

Start mowing using the app or the manual controls.

Press the start button or use the app to begin mowing.
Monitor the mower's progress via the app.
Return to the charging station when mowing is complete.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower blades regularly.
Check the boundary wire for damage.
Update the app and mower firmware as needed.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in wet conditions.
Ensure the mower is properly maintained to avoid accidents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Boundary wire error	Wire damaged	Inspect and repair the boundary wire.
Mower stops unexpectedly	Obstacle detected	Clear the area of obstacles and restart.
App connection issues	Wi-Fi problems	Check Wi-Fi connection and restart the app.

Reset: Use the app to reset settings if necessary.

Support: For assistance, contact customer support at 1-800-555-0199 or visit www.worx.com.