Worx LANDROID M WR112MI Lawn Mower Manual

The Worx LANDROID M WR112MI is an advanced robotic lawn mower designed to maintain your lawn effortlessly. It features a cutting width of 7 inches, a maximum cutting area of 1/4 acre, and is equipped with a powerful lithium battery that provides up to 90 minutes of runtime. The mower is designed for efficient cutting with its mulching capability, smart navigation, and programmable scheduling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Efficiently navigates through your lawn using advanced sensors.
Mulching Capability	Chops grass into fine pieces, returning nutrients to the soil.
Programmable Scheduling	Set mowing times according to your preference.
Rain Sensor	Automatically returns to the charging station during rain.
Boundary Wire	Defines the mowing area to prevent the mower from going off course.

Installation

Unpack the mower and inspect all components. Follow the steps below for installation.

Set up the charging station: Place it on a flat surface near a power outlet.
Install boundary wire: Outline the mowing area to keep the mower within designated limits.
Connect the power supply to the charging station.

WARNING! Ensure the boundary wire is properly installed to avoid damage to the mower.

First-Time Setup

Power on the mower and follow the on-screen prompts to configure settings.

Set the current date and time.
Program the mowing schedule based on your lawn's needs.
Test the boundary wire to ensure proper operation.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 7 inches.
Maximum Cutting Area: 1/4 acre.
Battery Type: Lithium-ion.
Runtime: Up to 90 minutes.
Charging Time: Approximately 90 minutes.
Weight: 20 lbs.
Dimensions: 24 x 18 x 10 inches.

Controls and Settings

Access settings via the onboard display or the mobile app. Key controls include power, start, stop, and scheduling options.

Connecting to the App

Download the Worx app to connect your mower for remote control and monitoring.

Ensure the mower is powered on.
Follow the app instructions to connect via Bluetooth or Wi-Fi.
Customize settings and monitor mowing progress through the app.

Operating the Mower

To start mowing, press the start button or schedule via the app.

Ensure the area is clear of obstacles.
Monitor the mower during operation for safety.
Return to charging station when mowing is complete.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the battery and charging station regularly.
Inspect the boundary wire for any damage.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Uneven cutting	Blades dull	Sharpen or replace the blades as needed.
Boundary wire issues	Wire damaged	Inspect and repair any breaks in the boundary wire.
Mower stops unexpectedly	Obstacles detected	Clear the area of any obstacles.

Service: For further assistance, contact customer support.