Worx LANDROID WA3751 Lawn Mower Manual

The Worx LANDROID WA3751 is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 1/4 acre, cutting grass efficiently while avoiding obstacles. The mower features a weather-resistant design, programmable cutting schedules, and a mobile app for remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, mobile app, weather-resistant casing, obstacle detection sensors.

Feature	Description
Robotic Mower	Autonomously mows your lawn without human intervention.
Mobile App	Control and schedule mowing from your smartphone.
Obstacle Detection	Automatically avoids obstacles in its path.
Weather Resistant	Designed to operate in various weather conditions.
Programmable Schedule	Set specific times for mowing to fit your lifestyle.

Installation

Unpack and inspect contents. Place charging station on a flat surface.

Connect the charging station to a power source.
Set up boundary wire to define mowing area.
Ensure the mower is fully charged before first use.
Test the mower's operation in a small area.

WARNING! Ensure the area is clear of debris before mowing.

First-Time Setup

Power on the mower; follow the app prompts for setup.

Download the Worx app and create an account.
Connect the mower to your Wi-Fi network.
Set your lawn size and mowing schedule in the app.
Start the mower and monitor its first run.

CAUTION! Keep children and pets away during operation.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 20 lbs.
Cutting Height: Adjustable from 1 to 3 inches.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, manual control buttons, status indicators.

Settings: Adjust cutting height, set mowing schedule, and check battery status.

Connecting Devices

Connect the mower to your smartphone via Bluetooth or Wi-Fi.

Ensure the mower is powered on.
Open the Worx app and follow the connection prompts.
Confirm connection and adjust settings as needed.

Tip: Keep the app updated for optimal performance.

Operating the Mower

The mower operates autonomously based on the set schedule.

Press the power button to start the mower.
Monitor its operation via the app.
Ensure the boundary wire is intact for proper navigation.

WARNING! Do not attempt to manually guide the mower while in operation.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower blades after each use.
Check and replace the battery as needed.
Inspect the boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in wet conditions.
Ensure the mower is on a stable surface during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Uneven cutting	Blades dull	Sharpen or replace blades as needed.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
App connection failure	Wi-Fi issues	Check Wi-Fi connection and restart the app.

Reset: Refer to the app for reset instructions if needed.

Service: Contact customer support for further assistance.