Worx LANDROID WA3796 Lawn Mower Manual

The Worx LANDROID WA3796 is an advanced robotic lawn mower designed to provide a hassle-free lawn care experience. With its intelligent navigation system, it can efficiently mow lawns up to 1/4 acre, handle slopes up to 20 degrees, and navigate through narrow passages. The mower features a weather-resistant design, a powerful lithium battery, and customizable mowing schedules. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Mowing Operations 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

FeatureDescription
Smart NavigationEfficiently navigates around obstacles and narrow passages.
Weather ResistantDesigned to operate in various weather conditions.
Customizable ScheduleSet mowing times according to your preference.
Battery LifePowered by a long-lasting lithium battery for extended mowing.
Safety FeaturesIncludes lift and tilt sensors for safe operation.

Installation

Unpack the mower and inspect all components. Follow the steps below for proper installation.

  1. Set up the charging station: Place it in a dry area with access to power.
  2. Install boundary wire: Outline the mowing area to keep the mower within designated limits.
  3. Connect the mower to the charging station and allow it to charge fully before first use.

WARNING! Ensure the area is clear of obstacles before mowing.

First-Time Setup

Power on the mower and follow the on-screen prompts to configure settings.

  1. Set the mowing schedule: Choose preferred days and times for mowing.
  2. Adjust cutting height: Set according to your lawn's needs.
  3. Connect to the mobile app for remote control and monitoring.

CAUTION! Ensure the boundary wire is correctly installed before operation.

Specifications

Controls and Settings

Access settings via the onboard display or the mobile app. Key controls include power, schedule settings, and cutting height adjustments.

Mobile App: Control mowing operations, receive notifications, and monitor battery status.

Connecting to the App

Download the Worx app from your device's app store. Follow the instructions to connect your mower.

  1. Ensure the mower is powered on.
  2. Follow the app prompts to connect via Bluetooth or Wi-Fi.
  3. Customize settings and monitor mowing progress through the app.

Tip: Keep the app updated for the best performance.

Mowing Operations

The mower will automatically follow the set schedule. Ensure the boundary wire is intact for proper navigation.

  1. Press the start button to begin mowing.
  2. Monitor the mower's progress through the app.
  3. Return to the charging station when mowing is complete.

WARNING! Do not attempt to manually guide the mower while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower's blades and wheels after each use.
  2. Check the boundary wire for any damage.
  3. Store the mower in a dry place when not in use.

CAUTION! Always power off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Important: Do not operate the mower in wet conditions or on steep slopes.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully before use.
Uneven cuttingBlades dullSharpen or replace the blades as needed.
Boundary wire issuesWire damagedInspect and repair the boundary wire.
Mower not returning to stationSignal interferenceCheck for obstacles blocking the signal.

Reset: Refer to the app for reset instructions if needed.

Service: Contact customer support at 1-800-555-0199 or visit www.worx.com for assistance.

Worx LANDROID WA3796 Lawn Mower Manual © - All Rights Reserved 2026