Worx LANDROID WG791 Lawn Mower Manual

The Worx LANDROID WG791 is an innovative robotic lawn mower designed to provide a hassle-free mowing experience. With its advanced navigation system, it can efficiently mow lawns up to 1/4 acre, handling slopes of up to 20 degrees. The mower features a rain sensor, allowing it to return to its charging station during inclement weather, and it can be controlled via a smartphone app for added convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, smartphone app control, adjustable cutting height.

Feature	Description
Robotic Mower	Autonomously mows your lawn without human intervention.
Charging Station	Automatically returns to charge when battery is low.
Rain Sensor	Detects rain and returns to the charging station.
Smartphone App	Control and schedule mowing from your mobile device.
Adjustable Cutting Height	Customize the height of the grass cut.

Installation

Unpack the mower and charging station. Place the charging station in a dry, flat area.

Connect the charging station to a power outlet.
Set up boundary wire to define the mowing area.
Ensure the mower is fully charged before first use.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower and follow the on-screen prompts in the app.

Connect to Wi-Fi: Follow instructions in the app to connect the mower.
Set mowing schedule: Use the app to set preferred mowing times.
Adjust cutting height: Set the desired cutting height via the app.

CAUTION! Ensure the boundary wire is properly installed to avoid mowing outside designated areas.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 20 lbs.
Noise Level: 60 dB.
Cutting Height Range: 1.5 to 3.5 inches.

Controls and Settings

Access settings via the smartphone app. Manual controls are available on the mower.

Manual Controls: Power button, cutting height adjustment, and start/stop button.

Connecting Devices

Connect the mower to Wi-Fi for remote operation via the app.

Ensure Wi-Fi is enabled on your smartphone.
Follow the app instructions to connect the mower.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start the mower using the app or the manual controls.

Press the start button or use the app to begin mowing.
Monitor the mower's progress via the app.
Return to the charging station when mowing is complete.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for any damage.
Store the mower indoors during winter months.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in wet conditions.
Ensure the mower is properly maintained.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Mower stops mid-operation	Boundary wire issue	Check boundary wire for breaks.
Uneven cutting	Blades dull	Sharpen or replace mower blades.
App not connecting	Wi-Fi issue	Check Wi-Fi signal strength and reconnect.

Reset: Use the app to reset settings if necessary.

Service: For support, visit www.worx.com or contact customer service.