Worx LANDROID WG792E Lawn Mower Manual

The Worx LANDROID WG792E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. It features advanced navigation technology, a powerful battery, and customizable mowing schedules. With its ability to handle slopes and various terrains, the LANDROID ensures a perfectly manicured lawn without the hassle of traditional mowing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, rain sensor, mobile app control, and adjustable cutting height.

FeatureDescription
Robotic MowerAutonomously mows your lawn with minimal human intervention.
Charging StationAutomatically returns to the station when the battery is low.
Boundary WireDefines the mowing area to prevent the mower from going off course.
Rain SensorPauses mowing during rain to protect the mower and lawn.
Mobile App ControlAllows scheduling and monitoring from your smartphone.
Adjustable Cutting HeightCustomizes the mowing height to suit your lawn type.

Installation

Unpack the mower and charging station. Follow these steps for installation:

  1. Choose a suitable location for the charging station.
  2. Install the boundary wire around the mowing area.
  3. Connect the charging station to a power source.
  4. Ensure the mower is charged before first use.

WARNING! Ensure the boundary wire is securely installed to avoid damage.

First-Time Setup

Power on the mower and follow the on-screen prompts to set it up.

  1. Connect to Wi-Fi for mobile app access.
  2. Set your mowing schedule in the app.
  3. Adjust cutting height according to your lawn needs.
  4. Test the mower in a small area to ensure proper operation.

CAUTION! Always supervise the mower during the first use.

Specifications

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, cutting height adjustment, and status indicators.

Mobile App: Schedule mowing times, adjust settings, and monitor battery status.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote access.

  1. Download the Worx app from your app store.
  2. Follow the app instructions to connect the mower.
  3. Ensure your smartphone is connected to the same network.

Tip: Keep the app updated for the best performance.

Operating the Mower

To operate the mower, ensure it is charged and follow these steps:

  1. Power on the mower.
  2. Set the desired mowing schedule in the app.
  3. Monitor the mower during its first operation.
  4. Adjust settings as necessary for optimal performance.

WARNING! Do not operate the mower in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use.
  2. Check and replace the blades as needed.
  3. Inspect the boundary wire for damage.
  4. Store the mower in a dry place during winter.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully before use.
Uneven cuttingBlades dullInspect and replace blades as necessary.
Boundary wire issuesWire damagedInspect the boundary wire for breaks or damage.
Mower stops unexpectedlyBattery issueCheck battery connections and charge level.
Wi-Fi connection problemsNetwork issuesRestart the mower and router; reconnect.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.

Worx LANDROID WG792E Lawn Mower Manual © - All Rights Reserved 2026