Worx LANDROID WG793E Lawn Mower Manual

The Worx LANDROID WG793E is an innovative robotic lawn mower designed to provide a hassle-free mowing experience. With advanced features such as a cutting width of 18 cm, adjustable cutting height, and the ability to navigate complex lawns, this mower is perfect for maintaining your garden effortlessly. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Cutting Width	18 cm for efficient mowing
Adjustable Cutting Height	Allows customization of grass length
Smart Navigation	Efficiently navigates complex lawns
Weather Resistant	Can operate in light rain
Remote Control	Control mower from your smartphone
Safety Sensors	Stops blades when lifted

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Lay boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure boundary wire is properly installed to avoid mower damage.

First-Time Setup

Power on the mower; follow on-screen prompts to configure settings.

Set mowing schedule: Use the app to customize mowing times.
Adjust cutting height: Set according to your lawn's needs.
Test the boundary wire: Ensure mower stays within designated area.

CAUTION! Ensure the area is clear of obstacles before operation.

Specifications

Model: Worx LANDROID WG793E.
Cutting Width: 18 cm.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 9.5 kg.
Maximum Slope: 35% incline.
Noise Level: 60 dB.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Mobile App: Start, stop, and schedule mowing sessions remotely.

Settings include cutting height adjustment, mowing schedule, and boundary wire configuration.

Connecting Devices

Connect the mower to your home Wi-Fi for remote access.

Download the Worx app on your smartphone.
Follow the prompts to connect the mower to your Wi-Fi network.
Ensure the mower is within range of the Wi-Fi signal.

Tip: Keep the app updated for the best performance.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

Press the start button on the mower or use the app.
The mower will navigate the lawn according to the set schedule.
Monitor the mower's progress via the app.

WARNING! Do not obstruct the mower while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for damage regularly.
Store the mower indoors during harsh weather conditions.

Safety Information

Always follow safety guidelines when operating the mower.

Keep children and pets away from the mowing area.
Do not attempt to repair the mower yourself.
Ensure the mower is turned off when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Low battery	Charge the mower fully before use.
Boundary wire error	Wire damage	Inspect and repair the boundary wire.
Mower stops unexpectedly	Obstacles in the path	Clear the mowing area of obstacles.
Uneven cutting	Blades dull	Sharpen or replace the mower blades.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.