Worx LANDROID WG796E Lawn Mower Manual

The Worx LANDROID WG796E is an innovative robotic lawn mower designed to make lawn care effortless. With advanced navigation technology, it can efficiently mow areas up to 800 square meters, handle slopes up to 35%, and return to its charging station when the battery is low. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Uses advanced sensors to navigate and avoid obstacles.
Weatherproof	Designed to operate in various weather conditions.
Programmable Schedule	Set mowing times according to your preferences.
Safety Features	Includes lift and tilt sensors for safe operation.
Battery Life	Powered by a lithium-ion battery for efficient mowing.

Installation

Unpack and inspect contents. Set up the charging station and boundary wire.

Choose a location for the charging station: Ensure it's on a flat surface and near a power outlet.
Install boundary wire: Lay the wire around the perimeter of the mowing area.
Connect the charging station to power.

WARNING! Ensure boundary wire is properly installed to avoid damage to the mower.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Set the mowing schedule: Use the app or onboard controls to program your preferred mowing times.
Adjust cutting height: Set the desired height for your lawn.
Test the boundary wire: Ensure the mower can navigate the area without issues.

CAUTION! Ensure the area is clear of obstacles before the first mowing.

Specifications

Cutting Width: 18 cm.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 9.5 kg.
Cutting Height: Adjustable from 20 mm to 60 mm.
Noise Level: 60 dB.
Max Slope: 35%.

Controls and Settings

Access settings via the mobile app or the onboard control panel. Key controls include power, schedule settings, and cutting height adjustment.

Remote Control: Optional remote control for manual operation.

Connecting Devices

Connect to the mobile app via Bluetooth for easy control and monitoring.

Download the Worx app from the App Store or Google Play.
Follow the app instructions to pair with the mower.

Tip: Ensure your smartphone's Bluetooth is enabled for a successful connection.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

Press the power button to turn on the mower.
It will automatically follow the programmed schedule.
Monitor the mower's progress via the app.

WARNING! Do not attempt to lift or move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for any damage.
Store the mower indoors during winter months.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower.
Boundary wire issue	Wire damaged	Inspect and repair the boundary wire.
Mower not following schedule	Settings incorrect	Check and adjust the schedule in the app.
Uneven cutting	Blades dull	Sharpen or replace the mower blades.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.