Worx LANDROID WR235 Lawn Mower Manual

The Worx LANDROID WR235 is an advanced robotic lawn mower designed to provide a hassle-free mowing experience. It features a cutting width of 7 inches, capable of handling lawns up to 1/4 acre. The mower is equipped with smart navigation technology, allowing it to efficiently navigate around obstacles and return to its charging station when needed. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, remote control, and mobile app connectivity.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and tight spaces.
Weatherproof Design	Can operate in light rain; designed for outdoor use.
Mobile App Control	Control and schedule mowing from your smartphone.
Boundary Wire	Defines the mowing area to prevent the mower from leaving the designated zone.
Charging Station	Automatically returns to the station when battery is low.

Installation

Unpack and inspect contents. Set up the charging station and install boundary wire.

Choose a location for the charging station: Ensure it is on a flat surface and near a power outlet.
Install boundary wire: Lay the wire around the perimeter of the lawn, securing it with stakes.
Connect the charging station to power and place the mower on the station.

WARNING! Ensure the area is clear of obstacles before mowing.

First-Time Setup

Power on the mower; follow the mobile app prompts for setup.

Download the Worx app: Available on iOS and Android.
Connect the mower to Wi-Fi: Follow the app instructions to connect.
Set mowing schedule: Use the app to customize your mowing times.

CAUTION! Ensure the boundary wire is correctly installed before starting.

Specifications

Cutting Width: 7 inches.
Maximum Lawn Size: 1/4 acre.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Weight: 20 lbs.
Noise Level: 60 dB.
Operating Temperature: 32°F to 104°F.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings: Adjust mowing schedule, cutting height, and more through the app.

Connecting Devices

Connect the mower to your smartphone via the Worx app for remote control.

Ensure the mower is powered on and within range of your Wi-Fi network.
Follow the app instructions to connect.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start mowing using the mobile app or the control panel.

Press the start button or use the app to initiate mowing.
The mower will navigate the lawn based on the set schedule.
Monitor the mower's status through the app.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use: Remove grass clippings and debris.
Check blades regularly: Replace if dull or damaged.
Inspect boundary wire for damage: Repair as needed.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate the mower in heavy rain or storms.
Ensure the mower is on a flat surface during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower.
Boundary wire cut	Damage to wire	Inspect and repair the boundary wire.
Mower not returning to charging station	Obstruction	Clear any obstacles around the charging station.
Uneven cutting	Blades dull	Sharpen or replace the blades.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.