Worx Landroid L Lawn Mower Manual

The Worx Landroid L is an advanced robotic lawn mower designed to keep your lawn perfectly trimmed with minimal effort. It features a cutting width of 20 cm, adjustable cutting height, and can handle lawns up to 1,000 square meters. The mower is equipped with smart technology, including Wi-Fi connectivity, allowing you to control it via a mobile app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, mobile app, rain sensor, and adjustable cutting height.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and tight spaces.
Wi-Fi Connectivity	Control and monitor your mower from anywhere using the app.
Rain Sensor	Automatically returns to the charging station during rain.
Adjustable Cutting Height	Customize cutting height from 20mm to 60mm.
Boundary Wire	Defines the mowing area and prevents the mower from going outside.

Installation

Unpack and inspect contents. Set up the charging station in a dry, shaded area.

Lay out the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the app instructions for setup.

Download the Worx Landroid app from your app store.
Connect the mower to your Wi-Fi network.
Set up your mowing schedule in the app.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 20 cm.
Cutting Height: Adjustable from 20mm to 60mm.
Battery: Lithium-ion, 20V, 4Ah.
Charging Time: Approximately 90 minutes.
Working Area: Up to 1,000 square meters.
Weight: 9.5 kg.
Noise Level: 60 dB.

Controls and Settings

Access settings via the mobile app or the control panel on the mower. Key controls include power, start/stop, and cutting height adjustment.

Connecting to the App

Follow the in-app instructions to connect your mower to your smartphone.

Ensure the mower is powered on.
Open the app and create an account or log in.
Follow prompts to connect to your mower.

Tip: Keep your smartphone close to the mower during setup.

Operating the Mower

Start mowing by selecting your schedule in the app or using the control panel.

Press the start button or schedule via the app.
Monitor the mowing progress through the app.
Return to the charging station when mowing is complete.

WARNING! Do not attempt to move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance. Clean the mower and check the blades regularly.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
App connection issues	Wi-Fi signal weak	Move the router closer to the mower.
Mower stuck	Obstacle in the way	Clear the area around the mower.

Reset: Refer to the app for reset instructions if needed.

Service: Contact customer support for further assistance.