Worx Landroid L1000 WR165E Lawn Mower Manual

The Worx Landroid L1000 WR165E is an advanced robotic lawn mower designed for efficient grass cutting with minimal human intervention. It features a cutting width of 18 cm, a maximum cutting area of 1000 m², and is equipped with intelligent navigation technology to avoid obstacles and ensure a precise mowing pattern. The mower operates on a rechargeable battery, making it eco-friendly and convenient for homeowners. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

FeatureDescription
Cutting Width18 cm for efficient mowing
Maximum Cutting Area1000 m² suitable for medium-sized lawns
Smart NavigationAvoids obstacles and optimizes mowing path
Battery PoweredRechargeable battery for eco-friendly operation
Weather ResistantCan operate in light rain
Remote ControlControl mower via smartphone app
Programmable ScheduleSet mowing times according to your preference

Installation

Unpack the mower and charging station. Follow these steps for installation:

  1. Choose a suitable location for the charging station.
  2. Install boundary wire around the mowing area.
  3. Connect the charging station to a power outlet.
  4. Ensure the mower is placed on the charging station to charge before the first use.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the on-screen prompts.

  1. Set the current date and time.
  2. Program the mowing schedule using the app.
  3. Adjust cutting height according to your lawn type.
  4. Test the mower in a small area to ensure proper operation.

CAUTION! Keep children and pets away during setup.

Specifications

Controls and Settings

Access settings via the mobile app or the onboard interface. Key controls include:

Mobile App: Start/stop, schedule, and adjust settings remotely.

Onboard Interface: Manual start/stop, cutting height adjustment.

Connecting Devices

Connect the mower to your home Wi-Fi for remote operation:

  1. Download the Worx Landroid app.
  2. Follow the app instructions to connect to Wi-Fi.
  3. Ensure the mower is within range of the Wi-Fi signal.

Tip: Keep the app updated for the best performance.

Operating the Mower

To operate the mower:

  1. Ensure the mower is charged and the boundary wire is installed.
  2. Use the app to start the mowing cycle.
  3. Monitor the mower's progress through the app.
  4. Return the mower to the charging station after use.

WARNING! Do not attempt to operate the mower in heavy rain or extreme weather conditions.

Maintenance

Regular maintenance is essential for optimal performance:

  1. Clean the mower blades after each use.
  2. Check the boundary wire for damage regularly.
  3. Store the mower indoors during winter months.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower:

Regulatory Information

This product complies with relevant safety standards and regulations. For support, visit www.worx.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the mower fully before use.
Boundary wire errorWire damagedInspect and repair the boundary wire.
Mower not cuttingBlades dullSharpen or replace the mower blades.
Wi-Fi connection issuesSignal weakMove the mower closer to the router.

Reset: Use the app to reset settings if necessary.

Service: For assistance, contact customer service at 1-800-555-0199.

Worx Landroid L1000 WR165E Lawn Mower Manual © - All Rights Reserved 2026