Worx Landroid L800 Lawn Mower Manual

The Worx Landroid L800 is an advanced robotic lawn mower designed for efficient and effective lawn care. With its intelligent navigation system, it can handle lawns up to 800 square meters, making it perfect for medium to large yards. The mower features a cutting width of 22 cm, adjustable cutting height, and a weatherproof design, allowing it to operate in various conditions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

FeatureDescription
Smart NavigationEfficiently navigates around obstacles and returns to the charging station.
Weatherproof DesignOperates in light rain and withstands outdoor conditions.
Adjustable Cutting HeightAllows customization of grass length from 20mm to 60mm.
Remote ControlControl the mower via smartphone app for convenience.
Safety FeaturesIncludes lift and tilt sensors to prevent accidents.

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

  1. Lay out the boundary wire around the lawn perimeter.
  2. Connect the boundary wire to the charging station.
  3. Plug in the charging station and ensure it is powered.
  4. Test the mower's operation before first use.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower and follow the app instructions for setup.

  1. Download the Worx Landroid app and create an account.
  2. Connect the mower to your Wi-Fi network.
  3. Set mowing schedule and preferences through the app.
  4. Perform a test run to ensure proper operation.

CAUTION! Keep pets and children away during the initial setup.

Specifications

Controls and Settings

Access settings via the Worx Landroid app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings include mowing schedule, cutting height, and safety features.

Connecting to the App

Ensure the mower is powered on and within range of your Wi-Fi network.

  1. Open the Worx Landroid app and log in.
  2. Select "Add Device" and follow the prompts.
  3. Confirm connection and set preferences.

Tip: Keep the app updated for the best performance.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

  1. Press the power button to turn on the mower.
  2. Set the desired mowing schedule via the app.
  3. Monitor the mower's operation through the app.

WARNING! Do not attempt to operate the mower manually while it is in motion.

Maintenance

Regular maintenance ensures optimal performance and longevity of the mower.

  1. Clean the mower blades after each use.
  2. Check and replace the boundary wire if damaged.
  3. Inspect the charging station for debris.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery issueCheck battery charge and connections.
No cutting actionBlades are dullSharpen or replace blades as needed.
Mower stops unexpectedlyBoundary wire issueInspect boundary wire for breaks or disconnections.
App connection failsWi-Fi issueEnsure mower is within Wi-Fi range and restart the app.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service at 1-800-555-0199.

Worx Landroid L800 Lawn Mower Manual © - All Rights Reserved 2026