Worx Landroid M 700 Lawn Mower Manual

The Worx Landroid M 700 is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With its intelligent navigation system, it can handle lawns up to 700 square meters, cutting grass efficiently while avoiding obstacles. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key features include: intelligent navigation, rain sensor, adjustable cutting height, and a user-friendly mobile app for remote control.

Feature	Description
Intelligent Navigation	Maps your lawn for efficient mowing
Rain Sensor	Automatically returns to the charging station in rain
Adjustable Cutting Height	Customize grass length from 20mm to 60mm
Mobile App	Control and schedule mowing from your smartphone
Obstacle Detection	Avoids obstacles while mowing

Installation

Unpack the mower and accessories. Choose a suitable location for the charging station.

Install the charging station: Ensure it is on a flat surface and within reach of a power outlet.
Set up boundary wires: Outline the mowing area according to the instructions.
Connect the power supply: Plug in the charging station to an electrical outlet.

WARNING! Ensure the area is clear of obstacles before starting the installation.

First-Time Setup

Power on the mower and follow the on-screen prompts to configure settings.

Connect to Wi-Fi: Use the mobile app to connect the mower to your home network.
Set mowing schedule: Choose preferred days and times for mowing.
Adjust settings: Customize cutting height and other preferences.

CAUTION! Ensure the mower is on a stable surface during setup.

Specifications

Model: Worx Landroid M 700
Mowing Area: Up to 700 square meters
Battery: 20V Lithium-Ion
Cutting Width: 18 cm
Cutting Height: Adjustable from 20mm to 60mm
Weight: 9.5 kg
Charging Time: Approximately 90 minutes
Operating Time: Up to 90 minutes on a full charge

Controls and Settings

Access settings via the mobile app or the control panel on the mower. Key controls include power, start/stop, and cutting height adjustment.

Connecting to the App

Download the Worx Landroid app from your app store. Follow the instructions to connect your mower to the app for remote control.

Operating the Mower

To start mowing, ensure the mower is charged and within the boundary wires. Use the app or control panel to initiate mowing.

Maintenance

Regularly clean the mower and check the blades for wear. Replace blades as necessary for optimal performance.

Safety Information

Always follow safety guidelines when operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower not starting	Battery low	Charge the battery fully before use.
Uneven cutting	Blades dull	Inspect and replace blades if necessary.
Boundary wire issues	Wire damaged	Check for breaks in the boundary wire and repair.
Wi-Fi connection issues	Network problems	Ensure the mower is within range of the Wi-Fi signal.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.