Worx Landroid M Lawn Mower Manual

The Worx Landroid M is an innovative robotic lawn mower designed for efficient and effective lawn care. With advanced technology, it can navigate complex landscapes, handle slopes, and provide a clean cut for lawns up to 1/4 acre. Key features include automatic charging, customizable mowing schedules, and smartphone connectivity for remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Mowing Operations 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Automatic Charging	Returns to charging station when battery is low
Smartphone Connectivity	Control and schedule mowing via mobile app
Weather Resistant	Operates in light rain; designed for outdoor use
Customizable Mowing Schedule	Set preferred mowing times and frequency
Obstacle Detection	Automatically avoids obstacles in the lawn
Adjustable Cutting Height	Customize the height of the grass cut

Installation

Unpack the mower and components. Follow the instructions to set up the charging station and boundary wire.

Choose a location for the charging station: flat and close to a power outlet.
Install boundary wire around the lawn perimeter.
Connect the charging station to power.
Place the mower on the charging station to charge before first use.

WARNING! Ensure the area is clear of debris before installation.

First-Time Setup

Power on the mower; follow the app instructions to connect.

Download the Worx Landroid app from your app store.
Follow the prompts to connect the mower to your Wi-Fi network.
Set up your mowing schedule and preferences in the app.
Perform a test run to ensure proper operation.

CAUTION! Keep children and pets away during setup.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Charging Time: Approximately 90 minutes.
Working Area: Up to 1/4 acre.
Weight: 20 lbs.
Dimensions: 24 x 18 x 10 inches.
Noise Level: 60 dB.

Controls and Settings

Access mower settings via the mobile app or onboard controls. Adjust mowing schedules, cutting height, and more.

Remote Control: Use the app for remote operation and monitoring.

Connecting to the App

Ensure the mower is powered on and within range of your Wi-Fi network.

Open the Worx Landroid app.
Follow the prompts to add your mower.
Ensure the mower is connected to your Wi-Fi for remote access.

Tip: Keep the app updated for the best performance.

Mowing Operations

The mower will automatically start based on your set schedule. Monitor its progress via the app.

Press the start button or use the app to begin mowing.
Monitor battery level and mowing status in the app.
Ensure the boundary wire is intact for proper navigation.

WARNING! Do not attempt to manually move the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance. Clean the mower and check for wear on the blades.

Clean the mower after each use.
Check and replace blades as needed.
Inspect the boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower not starting	Battery low	Charge the mower fully before use.
Uneven cutting	Blades dull	Inspect and replace blades as necessary.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
App not connecting	Wi-Fi issues	Check Wi-Fi connection and try reconnecting.

Reset: Refer to the app for reset options if needed.

Service: For support, contact Worx customer service.