Worx Landroid M500 V2 WR165E Lawn Mower Manual

The Worx Landroid M500 V2 WR165E is an advanced robotic lawn mower designed for efficient grass cutting. It features a cutting width of 18 cm, adjustable cutting heights, and a robust battery system that allows for up to 60 minutes of operation on a single charge. The mower is equipped with smart navigation technology, allowing it to navigate complex garden layouts and avoid obstacles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and complex garden layouts.
Adjustable Cutting Height	Allows customization of grass length from 20mm to 60mm.
Weather Resistant	Designed to operate in various weather conditions.
Battery Life	Up to 60 minutes of operation on a single charge.
Remote Control	Control the mower via a smartphone app.

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Install boundary wire: Outline the area to be mowed.
Connect the charging station: Plug into a power outlet and ensure proper placement.
Test the mower: Ensure it returns to the charging station correctly.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the app prompts for initial setup.

Download the Worx Landroid app: Available on iOS and Android.
Connect to Wi-Fi: Follow the app instructions to connect the mower.
Set mowing schedule: Customize the days and times for mowing.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Cutting Width: 18 cm.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Max Area Capacity: Up to 500 m².
Charging Time: Approximately 90 minutes.
Weight: 9 kg.
Noise Level: 65 dB.

Controls and Settings

Access settings via the Worx Landroid app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings include mowing schedule, cutting height adjustment, and Wi-Fi settings.

Connecting to the App

Ensure the mower is powered on and within range of your Wi-Fi network.

Open the Worx Landroid app.
Follow the on-screen instructions to connect the mower.
Customize settings as needed.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start the mower using the app or the control panel.

Press the power button to turn on.
Set the desired mowing schedule via the app.
Monitor the mower's progress through the app.

WARNING! Do not approach the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check battery health periodically.
Inspect boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in wet conditions.
Ensure the mower is properly maintained.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Uneven cutting	Blade obstruction	Clean mower blades and check for debris.
Boundary wire not detected	Wire damage	Inspect boundary wire for breaks or damage.
Mower stops unexpectedly	Low battery	Return to charging station for recharge.

Reset: Follow app instructions for resetting the mower if needed.

Service: For support, contact Worx customer service.