Worx Landroid S400 Lawn Mower Manual

The Worx Landroid S400 is an advanced robotic lawn mower designed for efficient and effective lawn care. It features a cutting width of 20 cm, a maximum lawn area coverage of 400 m², and a powerful battery that allows for up to 60 minutes of mowing time on a single charge. With smart navigation technology, it can easily navigate around obstacles and return to its charging station when needed. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and tight spaces.
Weatherproof Design	Operates in various weather conditions.
Adjustable Cutting Height	Customizable cutting height for different grass types.
Mobile App Control	Control and schedule mowing via smartphone app.
Safety Sensors	Automatically stops blades when lifted or tilted.

Installation

Unbox the mower and charging station. Follow these steps for installation:

Choose a suitable location for the charging station.
Install the boundary wire around the lawn area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the boundary wire is securely installed to avoid accidents.

First-Time Setup

Power on the mower and follow the app instructions for setup.

Download the Worx Landroid app and create an account.
Connect the mower to your Wi-Fi network.
Set your mowing schedule and preferences in the app.
Test the mower to ensure it operates correctly.

CAUTION! Keep children and pets away during the setup process.

Specifications

Cutting Width: 20 cm.
Maximum Lawn Area: 400 m².
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes per charge.
Weight: 7.5 kg.
Noise Level: 60 dB.

Controls and Settings

Access mower settings via the mobile app or control panel on the mower.

Mobile App: Schedule mowing, adjust settings, and monitor battery status.

Control Panel: Start/stop mowing, adjust cutting height, and check status indicators.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote control.

Ensure the mower is powered on.
Follow the app instructions to connect to Wi-Fi.
Test the connection to ensure proper functionality.

Tip: Keep the Wi-Fi router within range of the mower for optimal performance.

Operating the Mower

To operate the mower, follow these steps:

Ensure the boundary wire is properly installed.
Set the desired mowing schedule in the app.
Press the start button or use the app to begin mowing.
Monitor the mower's progress via the app.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance:

Clean the mower after each use.
Check and replace blades as needed.
Inspect the boundary wire for damage.
Keep the charging station clean and free of debris.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep the area clear of obstacles and ensure children and pets are indoors during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Replace or sharpen blades.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
Mower not returning to station	Signal interference	Check for obstacles and reposition the station if needed.

Reset: Refer to the app for reset instructions if needed.

Service: Contact customer support for further assistance.