Worx Landroid SB 700 Lawn Mower Manual

The Worx Landroid SB 700 is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With its intelligent navigation system, it can handle lawns up to 1/2 acre, cutting grass efficiently while avoiding obstacles. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, remote control, and app connectivity.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and returns to the charging station.
Weather Resistant	Operates in various weather conditions, including light rain.
App Control	Control and schedule mowing via the smartphone app.
Boundary Wire	Defines the mowing area to prevent the mower from going outside designated zones.
Adjustable Cutting Height	Customize the cutting height to suit your lawn's needs.

Installation

Unpack the mower and components. Follow the steps below for proper installation.

Set up the charging station: Place it on a flat surface near a power outlet.
Install boundary wire: Lay the wire around the perimeter of your lawn.
Connect the power supply: Plug the charging station into an outlet.
Ensure the mower is charged before first use.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the on-screen prompts to configure settings.

Set the language: Choose your preferred language from the menu.
Program the mowing schedule: Set days and times for mowing.
Adjust cutting height: Select the desired height for your lawn.
Connect to the app: Follow instructions to link the mower to your smartphone.

CAUTION! Ensure the mower is on a stable surface during setup.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 90 minutes on a full charge.
Weight: 20 lbs.
Noise Level: 60 dB.
Cutting Height Range: 1.5 to 4 inches.
Area Coverage: Up to 1/2 acre.

Controls and Settings

Access settings via the onboard display or the mobile app. Key controls include power, start, stop, and scheduling options.

Remote: Use the remote control for manual operation and adjustments.

Connecting Devices

Connect the mower to your home Wi-Fi for app control.

Ensure the mower is powered on.
Follow the app instructions to connect to Wi-Fi.
Confirm connection and start using the app for control.

Tip: Keep your Wi-Fi signal strong for optimal performance.

Operating the Mower

To start mowing, press the start button or schedule via the app.

Ensure the boundary wire is correctly installed.
Press the start button or use the app to initiate mowing.
The mower will navigate and cut the grass automatically.

WARNING! Do not attempt to manually guide the mower while in operation.

Maintenance

Regular maintenance ensures optimal performance. Follow these guidelines:

Clean the mower after each use.
Check and replace blades as needed.
Inspect the boundary wire for damage.
Keep the charging station clean and free of debris.

CAUTION! Always disconnect the power before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Mower not following boundary	Boundary wire issue	Check boundary wire for breaks or misplacement.
Uneven cutting	Blades dull	Sharpen or replace blades as necessary.
App not connecting	Wi-Fi issue	Ensure Wi-Fi is working and mower is within range.

Reset: Follow app instructions for resetting the mower if needed.

Service: Contact customer support for further assistance.