Worx Landroid Series Lawn Mower Manual

The Worx Landroid Series is an innovative line of robotic lawn mowers designed to provide a hassle-free mowing experience. With advanced technology, these mowers are equipped with features such as automatic scheduling, obstacle detection, and customizable cutting heights. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Mowing Operations 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and remote control.

Feature	Description
Automatic Scheduling	Set your mowing schedule for optimal lawn care.
Obstacle Detection	Automatically navigates around obstacles in the yard.
Customizable Cutting Height	Adjust the cutting height to suit your lawn's needs.
Weather Resistant	Designed to operate in various weather conditions.
Smart App Control	Control and monitor your mower via a mobile app.

Installation

Unpack and inspect contents. Set up the charging station in a suitable location.

Install boundary wire: Outline the area to be mowed.
Connect the charging station to a power source.
Ensure the mower is charged before first use.

WARNING! Follow installation guidelines to avoid damage to the mower or lawn.

First-Time Setup

Power on the mower; follow the on-screen prompts in the app.

Connect to Wi-Fi: Ensure the mower is within range of your network.
Set mowing schedule: Use the app to customize your mowing times.
Adjust cutting height: Set the desired height for your lawn.

CAUTION! Ensure the area is clear of obstacles before the first mowing.

Specifications

Cutting Width: 20 cm.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 9 kg.
Noise Level: 60 dB.
Max Slope: 35% incline.
Weather Rating: IPX5.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings: Adjust mowing schedule, cutting height, and other preferences through the app.

Connecting to the App

Download the Worx Landroid app from your app store.

Open the app and create an account.
Follow the prompts to connect your mower to Wi-Fi.
Customize your settings and schedule through the app.

Tip: Ensure your phone is connected to the same Wi-Fi network as the mower.

Mowing Operations

The mower will operate according to the set schedule.

Monitor the mower's progress via the app.
Adjust settings as needed for optimal performance.
Ensure the boundary wire is intact for proper navigation.

WARNING! Do not attempt to manually move the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower's blades and wheels regularly.
Check battery health and replace if necessary.
Inspect boundary wire for any damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate the mower in heavy rain or storms.
Ensure the mower is properly maintained to avoid accidents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully.
Boundary wire issues	Wire damaged	Inspect and repair boundary wire.
Mower not following boundary	Incorrect installation	Reinstall boundary wire as per guidelines.
App connection issues	Wi-Fi problems	Check Wi-Fi connection and restart the app.

Reset: Use the app to reset settings if necessary.

Service: For support, contact Worx customer service.