Worx Landroid Vision M600 Lawn Mower Manual

The Worx Landroid Vision M600 is an advanced robotic lawn mower designed to maintain your lawn effortlessly. Equipped with intelligent navigation, it can handle complex landscapes and slopes up to 20 degrees. The mower features a cutting width of 20 cm and can manage lawns up to 600 square meters. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Intelligent navigation system, weatherproof design, adjustable cutting height, and mobile app control.

Feature	Description
Intelligent Navigation	Maps your lawn for efficient mowing
Weatherproof Design	Operates in various weather conditions
Adjustable Cutting Height	Customize the height of the grass cut
Mobile App Control	Control and schedule mowing from your smartphone
Safety Sensors	Stops blades when lifted or tilted

Installation

Unpack and inspect contents. Place the charging station on a flat surface.

Connect the charging station to a power source.
Install boundary wire around the mowing area.
Set up the mower on the charging station.
Ensure the mower is fully charged before first use.

WARNING! Follow installation instructions carefully to avoid damage.

First-Time Setup

Power on the mower; follow the app prompts to connect.

Download the Worx Landroid app.
Connect to Wi-Fi and create an account.
Follow the app instructions to set up mowing schedules.
Adjust settings for cutting height and mowing frequency.

CAUTION! Ensure the area is clear of obstacles before first use.

Specifications

Model: Worx Landroid Vision M600.
Cutting Width: 20 cm.
Battery: 20V Lithium-Ion.
Charging Time: 90 minutes.
Working Area: Up to 600 square meters.
Weight: 9 kg.
Noise Level: 60 dB.
Operating Temperature: 0°C to 40°C.

Controls and Settings

Access settings via the mobile app or the onboard interface. Key controls include power, cutting height adjustment, and scheduling options.

Connecting Devices

Connect the mower to your home Wi-Fi for remote control and monitoring.

Ensure your smartphone is connected to Wi-Fi.
Open the Worx Landroid app and follow connection prompts.
Check for firmware updates regularly.

Tip: Keep the app updated for optimal performance.

Operating the Mower

Start mowing by scheduling through the app or manually via the mower.

Press the power button to start.
Use the app to set mowing schedules.
Monitor the mower's progress via the app.
Return to the charging station when mowing is complete.

WARNING! Do not attempt to override safety features.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower after each use.
Check and replace blades as needed.
Inspect the boundary wire for damage.
Keep the charging station free of debris.

CAUTION! Always power off before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Uneven cutting	Blades dull	Inspect and replace blades if necessary.
Boundary wire issues	Wire damaged	Inspect wire for breaks and repair as needed.
App connection issues	Wi-Fi problems	Check Wi-Fi signal and router settings.

Reset: Follow app instructions to reset the mower if needed.

Service: For support, contact Worx customer service.