Worx Landroid WG795E.1 Lawn Mower Manual

The Worx Landroid WG795E.1 is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can efficiently mow areas up to 500 square meters. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and remote control.

Feature	Description
Robotic Mower	Automatically mows your lawn with minimal human intervention.
Charging Station	Automatically returns to the station when battery is low.
Boundary Wire	Defines the mowing area to prevent the mower from going outside designated zones.
Remote Control	Allows manual operation and programming of the mower.
Rain Sensor	Automatically returns to the charging station during rain.
Adjustable Cutting Height	Allows customization of grass length.

Installation

Unpack the mower and charging station. Follow these steps for installation:

Choose a suitable location for the charging station.
Lay the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the boundary wire is securely placed to avoid damage to the mower.

First-Time Setup

Power on the mower and follow the on-screen prompts to set up.

Set the current time and date.
Program the mowing schedule according to your preferences.
Test the boundary wire to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before starting the mower.

Specifications

Cutting Width: 18 cm.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 9 kg.
Noise Level: 60 dB.
Weatherproof Rating: IPX5.

Controls and Settings

Access settings via the control panel on the mower or through the mobile app.

Control Panel: Power button, schedule settings, and manual override.

Mobile App: Allows remote control, scheduling, and monitoring of the mower's status.

Connecting Devices

Connect the mower to your home Wi-Fi for remote access and updates.

Download the Worx Landroid app.
Follow the app instructions to connect the mower to Wi-Fi.
Ensure the mower is within range of the Wi-Fi signal.

Tip: Regularly check for software updates in the app.

Operating the Mower

To operate the mower, simply set the schedule and let it mow automatically.

Press the power button to turn on the mower.
Ensure the boundary wire is intact and the area is clear.
Monitor the mower's operation through the app.

WARNING! Do not attempt to manually override the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for any damage.
Store the mower indoors during harsh weather conditions.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate the mower in wet conditions.
Ensure the mower is properly maintained to avoid malfunctions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
Mower not returning to station	Charging station malfunction	Check the power supply to the charging station.
Uneven cutting	Blades dull	Sharpen or replace the mower blades.

Reset: Refer to the app for resetting the mower settings.

Service: For support, contact Worx customer service.