Worx Landroid WG795E Lawn Mower Manual

The Worx Landroid WG795E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With its intelligent navigation system, it can navigate complex garden layouts, handle slopes up to 35%, and return to its charging station automatically. The mower features a cutting width of 7 inches and can handle lawns up to 800 square meters. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

FeatureDescription
Smart NavigationEfficiently navigates around obstacles and complex garden layouts.
Weatherproof DesignCan operate in light rain and withstand outdoor conditions.
Adjustable Cutting HeightAllows customization of grass height from 20mm to 60mm.
Automatic ChargingReturns to charging station when battery is low.
Quiet OperationOperates at a low noise level, suitable for residential areas.

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

  1. Install boundary wire: Outline the mowing area using the provided wire.
  2. Connect the charging station: Plug it into a power outlet and ensure it is secure.
  3. Test the boundary: Ensure the mower can navigate the designated area without issues.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower and follow the on-screen prompts on the app.

  1. Download the Worx Landroid app: Available on iOS and Android.
  2. Connect to Wi-Fi: Follow the app instructions to connect the mower to your home network.
  3. Set mowing schedule: Customize the days and times for mowing.

CAUTION! Ensure the mower is in a safe area during setup.

Specifications

Controls and Settings

Access settings via the Worx Landroid app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings: Adjust mowing schedule, cutting height, and other preferences through the app.

Connecting to the App

Ensure the mower is powered on and within range of your Wi-Fi network.

  1. Open the Worx Landroid app and create an account.
  2. Follow the prompts to connect your mower to the app.
  3. Customize settings and schedules through the app interface.

Tip: Keep the app updated for the latest features and improvements.

Operating the Mower

Start the mower using the app or the control panel.

  1. Press the start button or use the app to initiate mowing.
  2. Monitor the mower's progress through the app.
  3. Stop the mower using the app or the control panel when needed.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use to remove grass clippings.
  2. Check and replace the blades as needed.
  3. Inspect the boundary wire for damage and repair if necessary.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully before attempting to start.
Boundary wire errorWire damagedInspect and repair the boundary wire as needed.
Mower not cuttingBlades dullReplace or sharpen the blades for optimal cutting.
App connection issuesWi-Fi signal weakEnsure the mower is within range of the Wi-Fi router.

Reset: Use the app to reset settings if necessary.

Service: For support, contact Worx customer service.

Worx Landroid WG795E Lawn Mower Manual © - All Rights Reserved 2026