Worx Landroid WG797E Lawn Mower Manual

The Worx Landroid WG797E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With its intelligent navigation system, it can navigate complex garden layouts, avoid obstacles, and return to its charging station when needed. This manual provides essential information on features, installation, operation, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key features include: intelligent navigation, rain sensor, adjustable cutting height, and a user-friendly interface.

Feature	Description
Intelligent Navigation	Efficiently maps and mows your lawn.
Rain Sensor	Automatically returns to the charging station in rain.
Adjustable Cutting Height	Customize the cutting height for your lawn.
User-Friendly Interface	Easy-to-use controls for programming and operation.
Battery Powered	Eco-friendly operation with rechargeable battery.

Installation

Unpack the mower and inspect all components. Follow the steps below for installation.

Set up the charging station in a dry, flat area.
Install boundary wire to define mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the area is clear of obstacles before mowing.

First-Time Setup

Power on the mower and follow the on-screen prompts to configure settings.

Set the desired cutting schedule.
Adjust the cutting height according to your lawn type.
Test the boundary wire to ensure proper operation.

CAUTION! Always supervise the mower during its first operation.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Maximum Slope: 20 degrees.
Weight: 20 lbs.
Noise Level: 60 dB.

Controls and Settings

Access settings via the control panel on the mower. Use buttons to adjust cutting height and schedule.

Remote Control: Optional remote control for manual operation.

Connecting Devices

Connect the mower to the app for remote monitoring and control.

Download the Worx Landroid app from your app store.
Follow the app instructions to connect to your mower.
Monitor battery status and mowing schedule via the app.

Tip: Ensure your smartphone is connected to Wi-Fi for app functionality.

Operating the Mower

To start mowing, simply press the start button on the control panel or via the app.

Ensure the boundary wire is correctly installed.
Press START to begin mowing.
Monitor the mower during operation for safety.

WARNING! Keep pets and children away from the mowing area.

Maintenance

Regular maintenance ensures optimal performance of your mower.

Clean the mower blades regularly.
Check the boundary wire for any damage.
Store the mower indoors during winter months.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Ensure the area is clear of debris and obstacles.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Boundary wire issues	Wire damaged	Inspect and repair boundary wire.
Mower stops unexpectedly	Obstacle detected	Clear the area of obstacles.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.