Worx Landroid WG798E Lawn Mower Manual

The Worx Landroid WG798E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced features such as a cutting width of 7 inches, adjustable cutting height, and a powerful battery, it can handle lawns up to 1/4 acre. The mower is equipped with smart technology that allows for efficient navigation and obstacle avoidance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, remote control, boundary wire, and user manual.

Feature	Description
Cutting Width	7 inches for efficient mowing
Battery Life	Up to 90 minutes on a single charge
Cutting Height	Adjustable from 1.5 to 4 inches
Smart Navigation	Efficiently navigates around obstacles
Weather Resistant	Can operate in light rain
Remote Control	Control mower from your smartphone

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Install boundary wire: Outline the area to be mowed.
Connect the charging station: Plug into a power outlet.
Place the mower on the charging station to charge.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the app prompts to connect.

Download the Worx Landroid app: Available on iOS and Android.
Pair the mower with the app: Follow the on-screen instructions.
Set mowing schedule: Customize according to your lawn needs.

CAUTION! Ensure the boundary wire is correctly installed before first use.

Specifications

Model: Worx Landroid WG798E.
Cutting Width: 7 inches.
Battery: 20V Lithium-Ion.
Area Coverage: Up to 1/4 acre.
Cutting Height: Adjustable from 1.5 to 4 inches.
Weight: 20 lbs.
Charging Time: Approximately 90 minutes.

Controls and Settings

Access settings via the Worx Landroid app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings: Schedule mowing times, adjust cutting height, and check battery status.

Connecting to the App

Ensure Bluetooth is enabled on your smartphone for pairing.

Open the Worx Landroid app.
Select "Add Mower" and follow the prompts.
Ensure the mower is powered on and within range.

Tip: Keep the app updated for the latest features.

Operating the Mower

Start mowing by selecting the schedule or using manual control.

Press the power button to turn on.
Select the desired mowing mode via the app.
Monitor the mower's progress through the app.

WARNING! Do not attempt to lift or move the mower while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check battery health regularly.
Inspect boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in heavy rain or storms.
Wear appropriate footwear when handling the mower.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Boundary wire issues	Wire damaged	Inspect and repair boundary wire.
App not connecting	Bluetooth off	Ensure Bluetooth is enabled on your device.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.