Worx Landroid WR104SI Lawn Mower Manual

The Worx Landroid WR104SI is an innovative robotic lawn mower designed to provide a hassle-free mowing experience. With its intelligent navigation system, it can efficiently mow lawns up to 1/4 acre, featuring a cutting width of 7 inches and adjustable cutting heights. The mower is equipped with a rain sensor, allowing it to return to its charging station during inclement weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, rain sensor, adjustable cutting height.

Feature	Description
Robotic Mower	Autonomously mows your lawn without manual intervention
Charging Station	Automatically returns to charge when battery is low
Boundary Wire	Defines the mowing area to prevent the mower from going outside
Rain Sensor	Detects rain and returns the mower to the charging station
Adjustable Cutting Height	Allows customization of grass length from 1.5 to 4 inches

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

Lay out the boundary wire around the mowing area.
Connect the charging station to a power outlet.
Ensure the mower is fully charged before first use.
Test the boundary wire to confirm the mower recognizes the area.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the on-screen prompts to set up.

Set the mowing schedule using the control panel.
Adjust the cutting height according to your preference.
Test the mower in a small area to ensure proper operation.

CAUTION! Keep children and pets away during operation.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Mowing Area: Up to 1/4 acre.
Cutting Height: Adjustable from 1.5 to 4 inches.
Weight: 20 lbs.
Rain Sensor: Yes.
Noise Level: 60 dB.

Controls and Settings

Access settings via the control panel on the mower. Features include scheduling, cutting height adjustment, and manual operation mode.

Remote Control: Optional for manual operation and scheduling adjustments.

Connecting Devices

Connect the mower to the charging station and ensure the boundary wire is properly installed.

Turn off the mower before connecting to the charging station.
Ensure the boundary wire is intact and properly positioned.

Tip: Regularly check the boundary wire for any damage.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

Press the power button to turn on the mower.
Set the desired mowing schedule using the control panel.
Monitor the mower during its first operation to ensure proper function.

WARNING! Do not obstruct the mower while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after every few uses.
Check the boundary wire for any breaks or damage.
Store the mower in a dry place during off-seasons.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Boundary wire not detected	Wire damage	Inspect and repair the boundary wire.
Mower stops unexpectedly	Rain sensor activated	Check weather conditions and ensure proper placement of the mower.
Uneven cutting	Blades dull	Sharpen or replace the mower blades.

Service: For support, contact Worx customer service.