Worx Landroid WR106SI Lawn Mower Manual

The Worx Landroid WR106SI is a robotic lawn mower designed to efficiently maintain your lawn with minimal effort. It features advanced technology, including a cutting width of 7 inches, a maximum cutting area of 1/4 acre, and a runtime of up to 90 minutes on a single charge. The mower is equipped with smart navigation, allowing it to maneuver around obstacles and return to its charging station when needed. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and tight spaces.
Weatherproof Design	Operates in various weather conditions.
Adjustable Cutting Height	Allows customization of grass length.
Mobile App Control	Control and monitor the mower via smartphone.
Automatic Charging	Returns to the charging station when battery is low.

Installation

Unpack the mower and accessories. Follow the steps below to install the boundary wire.

Choose a suitable area for mowing and lay out the boundary wire.
Connect the boundary wire to the charging station.
Ensure the charging station is plugged into a power outlet.
Test the boundary wire to ensure proper setup.

WARNING! Ensure the mower is turned off during installation to avoid injury.

First-Time Setup

Power on the mower and follow the on-screen prompts to configure settings.

Set the current time and date using the control panel.
Program the mowing schedule according to your preferences.
Adjust the cutting height based on your lawn type.
Connect to the mobile app for remote control features.

CAUTION! Ensure the area is clear of obstacles before starting the mower.

Specifications

Cutting Width: 7 inches.
Maximum Cutting Area: 1/4 acre.
Runtime: Up to 90 minutes.
Charging Time: Approximately 90 minutes.
Weight: 20 lbs.
Power Source: Rechargeable lithium-ion battery.
Weather Rating: IPX5.

Controls and Settings

Access settings via the control panel on the mower. Key controls include START, STOP, and the cutting height adjustment.

Mobile App: Use the app to start, stop, and schedule mowing sessions remotely.

Connecting to the App

Download the Worx Landroid app from your device's app store. Follow the in-app instructions to connect your mower.

Ensure the mower is powered on and within range of your Wi-Fi network.
Follow the prompts in the app to complete the connection.
Customize settings and monitor the mower's status via the app.

Operating the Mower

To start mowing, press the START button on the control panel or use the mobile app.

Ensure the boundary wire is properly installed.
Check the battery level before starting.
Monitor the mower during operation for any issues.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean the mower's blades and underside regularly.
Check and replace the boundary wire if damaged.
Store the mower in a dry place during winter months.

Safety Information

Always follow safety guidelines to prevent accidents:

Keep children and pets away from the mower while in operation.
Do not operate the mower in wet conditions.
Wear appropriate footwear when handling the mower.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Uneven cutting	Blades dull	Sharpen or replace the blades as needed.
Boundary wire issues	Wire damaged	Inspect and repair or replace the boundary wire.
App connection issues	Wi-Fi signal weak	Move the mower closer to the router or check network settings.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service at 1-800-543-7659.