Worx Landroid WR110MI Lawn Mower Manual

The Worx Landroid WR110MI is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 1/4 acre, cutting grass efficiently while avoiding obstacles. Key features include a weatherproof design, customizable cutting schedules, and a user-friendly app for remote control. Below are key sections for safety, features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Uses sensors to navigate and avoid obstacles.
Weatherproof Design	Operates in light rain; designed for outdoor use.
Customizable Schedules	Set mowing times via the app for convenience.
Boundary Wire	Defines the mowing area to keep the mower within limits.
Rechargeable Battery	Long-lasting battery with automatic return to charging station.

Installation

Unpack and inspect contents. Choose a suitable location for the charging station.

Install boundary wire: Lay out the wire around the mowing area.
Connect the charging station: Plug it into a power outlet.
Test the mower: Ensure it can navigate the defined area.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the app prompts for setup.

Download the Worx Landroid app: Available on iOS and Android.
Connect to Wi-Fi: Follow the app instructions to connect the mower.
Set mowing schedule: Customize your preferred mowing times.

CAUTION! Ensure the mower is within range of the Wi-Fi signal.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion, 20V.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 20 lbs.
Cutting Height: Adjustable from 1.5 to 4 inches.
Area Coverage: Up to 1/4 acre.

Controls and Settings

Access settings via the Worx Landroid app. Manual controls are located on the mower.

Manual Controls: Power button, start/stop button, and height adjustment dial.

Connecting to the App

Ensure the mower is powered on and within Wi-Fi range.

Open the app and create an account.
Follow the prompts to connect the mower to your account.
Customize settings and schedules through the app.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start mowing by using the app or manual controls.

Press the start button or select 'Mow' in the app.
Monitor the mower's progress through the app.
Return to charging station when finished or when battery is low.

WARNING! Do not attempt to lift or move the mower while it is operating.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower after each use.
Check blades for wear and replace if necessary.
Inspect boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in heavy rain or storms.
Ensure the mower is on a flat surface during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Boundary wire not detected	Wire damage	Inspect and repair the boundary wire.
Mower stops unexpectedly	Obstacles detected	Clear the area of obstacles and restart.
App connection issues	Wi-Fi signal weak	Move the mower closer to the router.

Reset: Use the app to reset settings if needed.

Support: For assistance, contact customer service at 1-800-555-0199 or visit www.worx.com.