Worx Landroid WR130E Lawn Mower Manual

The Worx Landroid WR130E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With a cutting width of 18 cm and a maximum cutting area of 300 m², it features intelligent navigation, rain sensors, and customizable cutting schedules. The mower operates on a 20V battery, providing efficient and eco-friendly lawn care. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, rain sensor, mobile app control.

Feature	Description
Intelligent Navigation	Efficiently navigates around obstacles and returns to the charging station.
Rain Sensor	Automatically returns to the charging station in rainy conditions.
Customizable Cutting Schedule	Set specific days and times for mowing.
Boundary Wire	Defines the mowing area to prevent the mower from going outside designated zones.
Mobile App Control	Control and monitor the mower from your smartphone.

Installation

Unpack and inspect contents. Set up the charging station in a dry, shaded area.

Lay the boundary wire around the mowing area, ensuring it is securely fastened.
Connect the charging station to a power source.
Ensure the mower is charged before first use.

WARNING! Follow all safety instructions during installation to avoid injury.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Set the current date and time.
Configure the cutting schedule using the mobile app.
Test the boundary wire to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before starting the mower.

Specifications

Cutting Width: 18 cm.
Maximum Cutting Area: 300 m².
Battery: 20V Lithium-Ion.
Charging Time: Approximately 90 minutes.
Weight: 9 kg.
Noise Level: 60 dB.
Operating Temperature: 0°C to 40°C.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, cutting height adjustment, status indicators.

Settings: Schedule, mowing mode, and boundary wire configuration.

Connecting Devices

Connect the mower to your home Wi-Fi network for mobile app control.

Download the Worx Landroid app from the App Store or Google Play.
Follow the in-app instructions to connect the mower to Wi-Fi.
Ensure the mower is within range of the Wi-Fi signal.

Tip: Keep the app updated for the best performance.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set up correctly.

Press the power button to turn on the mower.
Use the mobile app to start the mowing schedule.
Monitor the mower's progress through the app.

WARNING! Do not attempt to lift or move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower's blades and wheels regularly.
Check the boundary wire for any damage.
Store the mower in a dry place during winter months.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate the mower in wet conditions.
Ensure the boundary wire is properly installed to avoid accidents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Mower not following boundary wire	Wire damaged	Inspect and repair the boundary wire.
Uneven cutting	Blades dull	Sharpen or replace the blades as needed.
Mower stops unexpectedly	Obstacle detected	Clear the area of obstacles and restart the mower.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.