Worx Landroid WR131E Lawn Mower Manual

The Worx Landroid WR131E is an advanced robotic lawn mower designed for efficient and effective lawn care. It features a cutting width of 18 cm, a maximum lawn area coverage of 600 m², and a cutting height adjustable between 20 mm to 60 mm. The mower is equipped with smart technology, including a rain sensor, anti-collision system, and Wi-Fi connectivity for remote control via a mobile app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, rain sensor, mobile app connectivity.

Feature	Description
Cutting Width	18 cm for efficient mowing
Maximum Lawn Area	Up to 600 m² coverage
Cutting Height	Adjustable from 20 mm to 60 mm
Rain Sensor	Automatically returns to charging station in rain
Wi-Fi Connectivity	Control and monitor via mobile app
Anti-Collision System	Prevents damage by detecting obstacles
Battery Type	Li-ion battery for long-lasting performance
Charging Time	Approximately 90 minutes
Weight	7.5 kg for easy handling

Installation

Unpack and inspect contents. Choose a suitable location for the charging station.

Install the boundary wire around the lawn area.
Connect the charging station to a power source.
Ensure the mower is placed on the charging station for initial charging.
Test the boundary wire to confirm proper installation.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower; follow the mobile app prompts for setup.

Download the Worx Landroid app and create an account.
Connect the mower to your Wi-Fi network.
Set the mowing schedule and preferences through the app.
Perform a test run to ensure proper operation.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Model: Worx Landroid WR131E.
Cutting Width: 18 cm.
Maximum Lawn Area: 600 m².
Battery Type: Li-ion.
Charging Time: Approximately 90 minutes.
Cutting Height: Adjustable from 20 mm to 60 mm.
Weight: 7.5 kg.
Wi-Fi Connectivity: Yes.
Rain Sensor: Yes.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Mobile App: Schedule mowing, adjust cutting height, monitor battery status.

Manual Controls: Power button, start/stop button, and settings adjustment.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote control.

Ensure the mower is powered on.
Follow the app instructions to connect to Wi-Fi.
Test the connection by accessing the mower through the app.

Tip: Keep the mower within range of the Wi-Fi signal for optimal performance.

Operating the Mower

To start mowing, use the mobile app or the manual controls.

Press the start button or select "Mow" in the app.
Monitor the mower's progress through the app.
Return to charging station when mowing is complete.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower's blades and body after each use.
Check the boundary wire for damage regularly.
Update the app for the latest features and improvements.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mower while in operation.
Do not operate the mower in wet conditions.
Ensure the area is free of obstacles and debris before mowing.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Boundary wire not detected	Improper installation	Check the boundary wire connections and layout.
Mower stops unexpectedly	Rain sensor activated	Wait for dry conditions before resuming operation.
Wi-Fi connection issues	Weak signal	Move the charging station closer to the router.
Uneven cutting	Blades dull	Sharpen or replace the blades as needed.

Reset: Use the app to reset settings if necessary.

Service: For support, contact customer service or visit the Worx website.