Worx Landroid WR139E Lawn Mower Manual

The Worx Landroid WR139E is an advanced robotic lawn mower designed for efficient and precise lawn care. It features a cutting width of 18 cm, a maximum working area of 600 m², and an adjustable cutting height ranging from 20 mm to 60 mm. The mower is equipped with a rain sensor, anti-collision system, and Wi-Fi connectivity for remote control via the Worx app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, anti-collision system, Wi-Fi connectivity.

Feature	Description
Cutting Width	18 cm for efficient mowing
Maximum Working Area	Up to 600 m²
Cutting Height Adjustment	20 mm to 60 mm for customized lawn care
Rain Sensor	Automatically returns to charging station in rain
Anti-Collision System	Prevents damage by detecting obstacles
Wi-Fi Connectivity	Control via the Worx app
Battery Type	Li-ion battery for long-lasting performance
Charging Time	Approximately 90 minutes
Runtime	Up to 60 minutes on a full charge

Installation

Unpack and inspect contents. Place the charging station on a flat surface.

Connect the charging station to a power source.
Set up boundary wires according to your lawn layout.
Ensure the mower is fully charged before first use.
Test the mower's operation in a small area.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the app prompts for setup.

Download the Worx app and create an account.
Connect the mower to your Wi-Fi network.
Set mowing schedules and preferences via the app.
Perform a test run to ensure proper operation.

CAUTION! Keep pets and children away during operation.

Specifications

Model: Worx Landroid WR139E
Cutting Width: 18 cm
Maximum Working Area: 600 m²
Battery Type: Li-ion
Charging Time: Approximately 90 minutes
Runtime: Up to 60 minutes
Cutting Height: Adjustable from 20 mm to 60 mm
Weight: 9 kg
Wi-Fi Connectivity: Yes

Controls and Settings

Access settings via the Worx app. Manual controls are located on the mower.

Manual Controls: Power button, cutting height adjustment, and status indicators.

Settings: Schedule mowing times, adjust cutting height, and monitor battery status through the app.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote control.

Ensure the mower is powered on.
Open the Worx app and follow the connection instructions.
Test the connection by sending a command from the app.

Tip: Keep the mower within range of your Wi-Fi router for optimal performance.

Operating the Mower

Follow the app instructions for mowing operations.

Start the mower via the app or manual controls.
Monitor the mowing progress through the app.
Return the mower to the charging station when finished.

WARNING! Do not attempt to operate the mower in heavy rain or extreme weather conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower and charging station regularly.
Check and replace blades as needed.
Inspect boundary wires for damage.
Store the mower indoors during winter months.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mower during operation.
Do not operate the mower in wet conditions.
Ensure the area is clear of obstacles before mowing.
Follow all maintenance guidelines for safe operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
No cutting action	Blades are dull	Replace blades as necessary.
Mower stops unexpectedly	Boundary wire issue	Inspect boundary wires for damage.
Wi-Fi connection issues	Router settings	Check router settings and signal strength.
Rain sensor not functioning	Sensor blockage	Clean the rain sensor area.

Reset: Refer to the app for reset instructions if necessary.

Service: For support, contact Worx customer service.