Worx Landroid WR140E Lawn Mower Manual

The Worx Landroid WR140E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced features such as a cutting width of 18 cm, adjustable cutting height, and a powerful battery, it can handle lawns up to 700 square meters. The mower is equipped with smart technology for efficient navigation and obstacle detection, ensuring a well-manicured lawn with minimal user intervention. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Cutting Width	18 cm for efficient mowing
Battery Life	Up to 90 minutes on a single charge
Smart Navigation	Utilizes sensors to navigate around obstacles
Adjustable Cutting Height	Allows for customization between 20-60 mm
Weather Resistant	Can operate in light rain
Mobile App Control	Control and schedule mowing via smartphone

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Install boundary wire: Follow the layout for your lawn.
Connect the charging station to a power source.
Ensure the mower is charged before first use.
Test the boundary wire for proper function.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower; follow the on-screen prompts.

Set the mowing schedule: Use the mobile app or control panel.
Adjust cutting height: Set according to your lawn's needs.
Test the mower's navigation: Observe its path and adjust boundary wire if necessary.

CAUTION! Ensure the mower is on a flat surface during setup.

Specifications

Model: Worx Landroid WR140E.
Cutting Width: 18 cm.
Battery: Lithium-ion, 20V.
Charging Time: Approximately 60 minutes.
Area Coverage: Up to 700 square meters.
Cutting Height: Adjustable from 20 mm to 60 mm.
Weight: 9 kg.
Noise Level: 60 dB.

Controls and Settings

Access settings via the control panel or mobile app. Key controls include power, schedule, and cutting height adjustments.

Mobile App: Allows for remote control, scheduling, and monitoring.

Connecting Devices

Connect the mower to Wi-Fi for mobile app functionality.

Download the Worx Landroid app.
Follow the app instructions to connect to your mower.
Ensure your smartphone is on the same network.

Tip: Keep the app updated for optimal performance.

Operating the Mower

To start mowing, ensure the mower is charged and the boundary wire is set.

Press the power button to turn on.
Set the desired mowing schedule via the app or control panel.
Monitor the mower's progress through the app.

WARNING! Do not attempt to override safety features.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use.
Check blades for wear and replace if necessary.
Inspect boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Boundary wire issues	Wire damaged	Inspect and repair boundary wire.
Mower gets stuck	Obstacles in path	Clear the area of obstacles.

Reset: Refer to the user manual for reset instructions.

Service: For support, contact Worx customer service.