Worx Landroid WR141E Lawn Mower Manual

The Worx Landroid WR141E is an advanced robotic lawn mower designed for efficient and precise lawn care. With its intelligent navigation system, it can easily maneuver around obstacles and maintain your lawn effortlessly. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and remote control. The mower features a rain sensor, adjustable cutting height, and a user-friendly interface.

FeatureDescription
Intelligent NavigationEfficiently navigates around obstacles and returns to the charging station.
Rain SensorAutomatically returns to the charging station in wet conditions.
Adjustable Cutting HeightAllows customization of grass length from 20mm to 60mm.
Boundary WireDefines the mowing area to prevent the mower from going outside designated zones.
Remote ControlEnables manual operation and programming from a distance.

Installation

Unpack the mower and accessories. Follow the steps below to install the boundary wire and charging station.

  1. Choose a suitable location for the charging station, ensuring it is on a flat surface.
  2. Lay the boundary wire around the desired mowing area, securing it with stakes.
  3. Connect the boundary wire to the charging station.
  4. Plug the charging station into a power outlet.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the on-screen prompts to set up your mowing schedule.

  1. Set the current time and date using the control panel.
  2. Program the desired mowing days and times.
  3. Adjust the cutting height according to your lawn's needs.

CAUTION! Ensure the boundary wire is correctly installed before operation.

Specifications

Controls and Settings

The mower features a user-friendly control panel for easy operation. Access settings for scheduling, cutting height, and mowing modes.

Remote Control: Use the remote to start, stop, or manually control the mower.

Connecting Devices

The mower can be connected to a smartphone app for additional features and monitoring.

  1. Download the Worx Landroid app from your device's app store.
  2. Follow the app instructions to connect to the mower via Bluetooth.
  3. Use the app to customize settings and receive notifications.

Tip: Ensure your smartphone's Bluetooth is enabled for connection.

Operating the Mower

To start mowing, simply press the start button on the control panel or use the remote control.

  1. Ensure the boundary wire is intact and the mower is charged.
  2. Press the start button to begin mowing.
  3. The mower will automatically return to the charging station when the battery is low.

WARNING! Do not attempt to lift or move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance. Follow these steps:

  1. Clean the mower's blades and housing after each use.
  2. Check and replace the boundary wire if damaged.
  3. Store the mower in a dry place during winter months.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully before use.
Uneven cuttingBlades dullSharpen or replace the blades as needed.
Boundary wire issuesWire damagedInspect and repair or replace the boundary wire.
Mower stuckObstacles in the wayRemove obstacles and restart the mower.

Reset: Refer to the app or manual for reset instructions.

Service: For support, contact Worx customer service.

Worx Landroid WR141E Lawn Mower Manual © - All Rights Reserved 2026