Worx Landroid WR142E Lawn Mower Manual

The Worx Landroid WR142E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With a cutting width of 28 cm and a maximum cutting area of 600 m², it features a powerful battery, smart navigation, and customizable mowing schedules. The mower is equipped with rain sensors, anti-collision technology, and can be controlled via a mobile app for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mowing Operation 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, mobile app control, rain sensor, anti-collision system.

Feature	Description
Cutting Width	28 cm for efficient mowing
Maximum Cutting Area	Up to 600 m²
Battery Type	Powerful lithium-ion battery
Smart Navigation	Efficient mowing path planning
Rain Sensor	Automatically returns to charging station in rain
Mobile App	Control and schedule mowing from your smartphone
Anti-Collision Technology	Prevents damage by detecting obstacles
Customizable Mowing Schedule	Set preferred mowing times

Installation

Unpack the mower and charging station. Place the charging station on a flat surface.

Connect the charging station to a power source.
Set up boundary wire to define the mowing area.
Ensure the mower is fully charged before first use.
Test the mower's operation in a small area.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Connect to Wi-Fi: Use the mobile app to connect the mower to your home network.
Set mowing schedule: Choose preferred days and times for mowing.
Adjust cutting height: Set the desired cutting height using the app.
Test mow: Run a test mow to ensure everything is functioning correctly.

CAUTION! Ensure the boundary wire is properly installed before use.

Specifications

Model: Worx Landroid WR142E
Cutting Width: 28 cm
Maximum Cutting Area: 600 m²
Battery: Lithium-ion, 20V
Charging Time: Approximately 90 minutes
Weight: 9.5 kg
Rain Sensor: Yes
Mobile App: Yes, for iOS and Android

Controls and Settings

Access settings via the mobile app or the control panel on the mower. Key controls include power, cutting height adjustment, and schedule settings.

Mobile App: Provides remote control, scheduling, and monitoring features.

Connecting Devices

Connect the mower to your home Wi-Fi network for remote control via the mobile app.

Ensure the mower is powered on.
Open the mobile app and follow the instructions to connect.
Test the connection by sending a command from the app.

Tip: Keep the mower within range of your Wi-Fi signal for optimal performance.

Mowing Operation

The mower operates automatically based on the set schedule. It will return to the charging station when the battery is low or when it detects rain.

Press the start button to begin mowing.
Monitor the mower's operation via the mobile app.
Adjust settings as needed for optimal performance.

WARNING! Do not attempt to manually move the mower while it is operating.

Accessibility Features

The mower includes features for easy operation, including voice commands via the mobile app and customizable settings for different lawn types.

Care & Cleaning

Regularly clean the mower and charging station. Use a dry cloth to wipe down surfaces and remove grass clippings.

CAUTION! Ensure the mower is powered off before cleaning.

Regulatory Information

This product complies with relevant safety standards and regulations. For support, visit the Worx website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
Uneven cutting	Blade dull	Sharpen or replace the blade as needed.
Wi-Fi connection issues	Weak signal	Move the charging station closer to the router.
Rain sensor not working	Sensor malfunction	Check for debris and clean the sensor area.

Reset: Refer to the user manual for reset instructions.

Service: For support, visit the Worx website or contact customer service.