Worx Landroid WR143 Lawn Mower Manual

The Worx Landroid WR143 is an advanced robotic lawn mower designed to provide a perfectly manicured lawn with minimal effort. It features a cutting width of 7 inches, a cutting height adjustable from 1.5 to 4 inches, and is capable of mowing areas up to 1/4 acre. The mower is equipped with smart technology that allows it to navigate complex lawns, avoid obstacles, and return to its charging station when needed. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Smart Navigation	Uses sensors to navigate and avoid obstacles.
Weatherproof Design	Can operate in light rain and withstand outdoor conditions.
Adjustable Cutting Height	Allows customization of grass length.
Remote Control	Control the mower via smartphone app.
Automatic Charging	Returns to charging station when battery is low.
Quiet Operation	Operates at a low noise level for minimal disturbance.

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Lay boundary wire around the mowing area to define the limits.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the area is free of obstacles before mowing.

First-Time Setup

Power on the mower; follow on-screen prompts.

Set the mowing schedule using the app or control panel.
Adjust cutting height according to your lawn's needs.
Test the boundary wire to ensure proper operation.

CAUTION! Keep pets and children away during operation.

Specifications

Cutting Width: 7 inches.
Cutting Height: Adjustable from 1.5 to 4 inches.
Battery: Lithium-ion, 20V.
Charging Time: Approximately 90 minutes.
Mowing Area: Up to 1/4 acre.
Weight: 20 lbs.
Noise Level: 60 dB.

Controls and Settings

Access settings via the control panel or mobile app. Key controls include power, schedule settings, and cutting height adjustment.

Connecting Devices

Connect the mower to your smartphone via Bluetooth for remote control.

Download the Worx Landroid app from the app store.
Follow the app instructions to pair with the mower.

Tip: Ensure your smartphone's Bluetooth is enabled.

Operating the Mower

Start the mower using the control panel or app. Monitor its progress through the app.

Press the start button to begin mowing.
Use the app to pause or stop the mower as needed.
Check battery status via the app.

WARNING! Do not attempt to manually move the mower while it is operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check and replace the boundary wire if damaged.
Store the mower indoors during extreme weather.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep hands and feet away from the cutting area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Boundary wire issues	Wire damaged	Inspect and repair boundary wire.
Mower stops unexpectedly	Obstacle detected	Remove obstacles from the mowing area.

Reset: Use the app to reset settings if necessary.

Service: For support, contact Worx customer service.