Worx Landroid WR143E Lawn Mower Manual

The Worx Landroid WR143E is an advanced robotic lawn mower designed for efficient and precise lawn care. It features a cutting width of 18 cm, a maximum cutting area of 500 m², and a powerful battery that allows for up to 60 minutes of operation on a single charge. The mower is equipped with smart technology, including a rain sensor, anti-collision system, and customizable cutting schedules. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, anti-collision system, customizable cutting schedules.

Feature	Description
Cutting Width	18 cm for efficient mowing
Maximum Cutting Area	Suitable for lawns up to 500 m²
Battery Life	Up to 60 minutes of operation
Rain Sensor	Automatically returns to charging station in rain
Anti-Collision System	Prevents damage by detecting obstacles
Customizable Schedules	Set mowing times according to your preference

Installation

Unpack and inspect contents. Place charging station on a flat surface.

Connect the charging station to a power outlet.
Set up boundary wire around the lawn area.
Ensure the mower is charged before first use.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower; follow on-screen prompts.

Set the mowing schedule using the app.
Adjust cutting height according to lawn type.
Test the mower in a small area before full operation.

CAUTION! Keep children and pets away during operation.

Specifications

Model: Worx Landroid WR143E
Cutting Width: 18 cm
Maximum Cutting Area: 500 m²
Battery Type: Lithium-ion
Battery Voltage: 20V
Charging Time: Approximately 90 minutes
Weight: 9 kg
Operating Temperature: 0°C to 40°C

Controls and Settings

Access settings via the mobile app or onboard controls. Key functions include start/stop, schedule settings, and cutting height adjustment.

Connecting Devices

Connect to Wi-Fi for remote access and control via the app.

Ensure the mower is powered on.
Follow the app instructions to connect to Wi-Fi.
Customize settings through the app interface.

Tip: Keep the app updated for best performance.

Operating the Mower

To start mowing, ensure the boundary wire is set and the mower is charged.

Press the start button or use the app to begin.
Monitor the mower during initial operation.
Adjust settings as necessary for optimal performance.

WARNING! Do not attempt to override safety features.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower after each use.
Check blades for wear and replace as needed.
Inspect boundary wire for damage.

CAUTION! Always disconnect the battery before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep the area clear of obstacles and ensure children and pets are indoors during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Boundary wire issues	Wire damaged	Inspect and repair boundary wire.
Mower stops unexpectedly	Rain sensor activated	Wait for dry conditions to resume.

Reset: Refer to the app for reset instructions if necessary.

Service: For support, contact Worx customer service.