Worx Landroid WR145E Lawn Mower Manual

The Worx Landroid WR145E is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced features such as a cutting width of 18 cm, a maximum mowing area of 500 m², and a cutting height adjustable from 20 to 60 mm, it ensures a perfectly manicured lawn. The mower is equipped with a rain sensor, anti-collision system, and can be controlled via a smartphone app for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Mowing Operations 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Cutting Width	18 cm for efficient mowing
Maximum Mowing Area	Up to 500 m²
Cutting Height	Adjustable from 20 to 60 mm
Rain Sensor	Automatically returns to charging station in rain
Anti-Collision System	Prevents damage by detecting obstacles
Smartphone Control	Control and schedule mowing via app
Battery Type	Li-ion battery for long-lasting performance
Charging Time	Approximately 90 minutes
Weight	7.5 kg for easy handling

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Install boundary wire: Outline the mowing area as per instructions.
Connect the charging station: Ensure it is plugged into a power source.
Place the mower on the charging station for initial charge.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower; follow the app prompts for setup.

Download the Worx Landroid app and create an account.
Connect the mower to your Wi-Fi network.
Set your mowing schedule through the app.

CAUTION! Ensure the mower is within range of the Wi-Fi signal.

Specifications

Model: Worx Landroid WR145E
Cutting Width: 18 cm
Maximum Mowing Area: 500 m²
Cutting Height: 20-60 mm adjustable
Battery Type: Li-ion
Charging Time: 90 minutes
Weight: 7.5 kg
Rain Sensor: Yes
Control: Smartphone app

Controls and Settings

Access settings via the smartphone app. Front panel includes power button and status indicators.

App Controls: Start/stop mowing, adjust schedule, check battery status.

Connecting to the App

Ensure the mower is powered on and within Wi-Fi range.

Open the Worx Landroid app.
Select 'Add Device' and follow the prompts.
Confirm connection and set preferences.

Tip: Keep your app updated for the best performance.

Mowing Operations

The mower operates automatically based on the set schedule.

Press the start button or use the app to initiate mowing.
The mower will navigate the area, avoiding obstacles.
It will return to the charging station when the battery is low or when mowing is complete.

WARNING! Do not attempt to move the mower while it is operating.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower after each use.
Check blades for wear and replace if necessary.
Inspect boundary wire for damage.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in wet conditions.
Ensure the mower is properly maintained.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Mower stops mid-operation	Boundary wire issue	Check boundary wire for breaks.
Uneven cutting	Blades dull	Sharpen or replace blades.
App connection issues	Wi-Fi signal weak	Move the mower closer to the router.

Reset: Use the app to reset settings if needed.