Worx Landroid WR146E Lawn Mower Manual

The Worx Landroid WR146E is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With its intelligent navigation system, it can efficiently mow areas up to 600 square meters. This model features a powerful battery, adjustable cutting height, and a rain sensor for optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Intelligent Navigation	Efficiently navigates around obstacles
Rain Sensor	Automatically returns to the charging station in rain
Adjustable Cutting Height	Customizable cutting height from 20mm to 60mm
Battery Life	Up to 90 minutes of mowing on a single charge
Remote Control	Control the mower via a smartphone app

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

Lay out the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the boundary wire is securely fastened.
Test the mower's operation before regular use.

WARNING! Ensure the area is clear of obstacles before mowing.

First-Time Setup

Power on the mower and follow the on-screen prompts.

Set the desired cutting height using the control panel.
Program the mowing schedule via the app.
Test the boundary wire to ensure proper operation.

CAUTION! Keep children and pets away during setup.

Specifications

Model: Worx Landroid WR146E
Cutting Width: 18 cm
Battery: 20V Lithium-Ion
Charging Time: 90 minutes
Area Coverage: Up to 600 m²
Weight: 9 kg
Noise Level: 60 dB

Controls and Settings

Access settings via the control panel or smartphone app. Key controls include power, cutting height adjustment, and scheduling options.

Connecting Devices

Connect the mower to Wi-Fi for remote operation via the app.

Download the Worx Landroid app from your app store.
Follow the in-app instructions to connect to your mower.
Ensure your smartphone is connected to the same Wi-Fi network.

Tip: Keep the app updated for optimal performance.

Operating the Mower

To start mowing, ensure the boundary wire is set and the mower is charged.

Press the power button to turn on the mower.
Set the desired mowing schedule via the app.
Monitor the mower's progress through the app.

WARNING! Do not attempt to override safety features.

Maintenance

Regular maintenance ensures optimal performance. Clean the mower and check the blades frequently.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully before use.
No cutting action	Blades are dull	Replace or sharpen the blades.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
Wi-Fi connection issues	Network problems	Check your Wi-Fi connection and router settings.

Reset: Refer to the app for reset instructions if needed.

Service: For support, contact Worx customer service.