Worx Landroid WR147 Lawn Mower Manual

The Worx Landroid WR147 is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With its advanced technology, it can navigate complex landscapes, handle slopes, and provide a clean cut for your grass. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, remote control, and adjustable cutting height.

FeatureDescription
Robotic MowerAutomatically mows your lawn without manual intervention.
Charging StationAutomatically returns to the station for recharging.
Boundary WireDefines the mowing area to prevent the mower from going outside designated zones.
Remote ControlAllows manual operation and programming of the mower.
Adjustable Cutting HeightCustomize the height of the grass cut to your preference.

Installation

Unpack and inspect contents. Set up the charging station in a dry, shaded area.

  1. Lay out the boundary wire around the mowing area.
  2. Connect the boundary wire to the charging station.
  3. Ensure the charging station is plugged into a power source.
  4. Test the mower's operation before finalizing the installation.

WARNING! Ensure the boundary wire is securely placed to avoid damage.

First-Time Setup

Power on the mower; follow on-screen prompts to configure settings.

  1. Set the mowing schedule: Choose days and times for mowing.
  2. Adjust cutting height: Set to your desired grass length.
  3. Test the boundary wire: Ensure the mower stays within the defined area.

CAUTION! Ensure the area is clear of obstacles before operation.

Specifications

Controls and Settings

Access settings via the onboard display or remote control. Key controls include power, schedule, and cutting height adjustments.

Remote: Start/stop, manual control, and scheduling options.

Connecting Devices

Ensure the mower is connected to the charging station and boundary wire is properly installed.

  1. Turn off the mower before connecting to the charging station.
  2. Ensure the charging station is plugged into a power source.

Tip: Regularly check connections for wear and tear.

Operating the Mower

Follow the programmed schedule for automatic mowing. Manually start the mower using the remote if needed.

  1. Press the start button to begin mowing.
  2. Monitor the mower for any obstacles.
  3. Return to charging station when mowing is complete.

WARNING! Do not obstruct the mower while in operation.

Maintenance

Regularly clean the mower and check for any wear on the blades.

  1. Remove grass clippings from the mower.
  2. Inspect and replace blades as necessary.
  3. Check battery connections and charging station regularly.

CAUTION! Always power off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery issueCheck battery charge and connections.
Mower stops mid-operationBoundary wire issueInspect boundary wire for breaks or disconnections.
Uneven cuttingBlade wearInspect and replace blades if necessary.
Charging station not workingPower supply issueCheck power outlet and connections.

Reset: Refer to the manual for reset instructions if needed.

Worx Landroid WR147 Lawn Mower Manual © - All Rights Reserved 2026