Worx Landroid WR153 Lawn Mower Manual

The Worx Landroid WR153 is an advanced robotic lawn mower designed to maintain your lawn effortlessly. With a cutting width of 20 cm and a maximum cutting area of 500 m², it features intelligent navigation, adjustable cutting heights, and a rain sensor for optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, remote control, and user manual.

Feature	Description
Smart Navigation	Uses sensors to navigate and avoid obstacles.
Adjustable Cutting Height	Allows customization of grass length.
Rain Sensor	Automatically returns to the charging station in rain.
Remote Control	Control the mower from a distance.
Boundary Wire	Defines the mowing area.

Installation

Unpack and inspect contents. Set up the charging station in a dry area.

Lay the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower; follow on-screen prompts.

Set the desired cutting height.
Program the mowing schedule.
Test the boundary wire for proper setup.

CAUTION! Ensure the mower is on a stable surface during setup.

Specifications

Cutting Width: 20 cm.
Maximum Cutting Area: 500 m².
Battery Type: Lithium-ion.
Charging Time: Approximately 90 minutes.
Weight: 9 kg.
Operating Temperature: 0°C to 40°C.

Controls and Settings

Access settings via the control panel on the mower. Use the remote control for manual operation.

Settings: Schedule, cutting height, and mowing mode.

Connecting Devices

Connect the mower to the app for remote monitoring and control.

Download the Worx Landroid app.
Follow the app instructions to connect to the mower.

Tip: Ensure your smartphone is connected to Wi-Fi during setup.

Operating the Mower

Start the mower using the control panel or remote.

Press the START button to begin mowing.
Monitor the mowing progress via the app.
Return to charging station when finished.

WARNING! Do not operate the mower in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for damage.
Store the mower in a dry place during winter.

Safety Information

Read all safety instructions before operating the mower.

CAUTION! Keep children and pets away from the mowing area.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the battery fully.
Uneven cutting	Blades dull	Sharpen or replace blades.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
Mower stops unexpectedly	Rain sensor activated	Wait for dry conditions to resume.

Reset: Refer to the app for reset instructions.

Service: For support, contact Worx customer service.