Worx Landroid WR154E Lawn Mower Manual

The Worx Landroid WR154E is an advanced robotic lawn mower designed for efficient grass cutting with minimal human intervention. It features a cutting width of 18 cm, adjustable cutting height, and can handle slopes up to 35%. The mower is equipped with a rain sensor, anti-collision system, and can be controlled via a smartphone app for convenient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, anti-collision system, smartphone app control.

FeatureDescription
Cutting Width18 cm for efficient mowing
Adjustable Cutting HeightAllows customization of grass length
Smartphone ControlControl mower remotely via app
Rain SensorAutomatically returns to charging station in rain
Anti-Collision SystemPrevents damage by detecting obstacles
Battery LifeUp to 90 minutes of mowing on a single charge
SlopesCan handle slopes up to 35%

Installation

Unpack and inspect contents. Place the charging station in a clear area.

  1. Set up the charging station: Ensure it is on a flat surface and connected to power.
  2. Install boundary wire: Define the mowing area by laying down the boundary wire.
  3. Connect the mower: Place the mower on the charging station to charge before first use.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the mower; follow the app prompts for initial setup.

  1. Connect to Wi-Fi: Use the app to connect the mower to your home Wi-Fi network.
  2. Set mowing schedule: Define the days and times for mowing.
  3. Adjust cutting height: Set the desired cutting height via the app.

CAUTION! Ensure the boundary wire is correctly installed before operation.

Specifications

Controls and Settings

Access settings via the smartphone app. Manual controls are available on the mower.

App Features: Schedule mowing, adjust settings, monitor battery status.

Connecting Devices

Connect the mower to your home Wi-Fi for remote operation.

  1. Ensure Wi-Fi is active and within range.
  2. Follow app instructions to connect the mower.

Tip: Keep the app updated for optimal performance.

Operating the Mower

Start mowing via the app or manually on the mower.

  1. Press the start button or use the app to begin mowing.
  2. The mower will navigate the area based on the boundary wire.
  3. Monitor the mowing progress via the app.

WARNING! Do not approach the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use.
  2. Check blades for wear and replace if necessary.
  3. Inspect boundary wire for damage.

Safety Information

Read all safety instructions before operating the mower.

CAUTION! Keep children and pets away from the mowing area.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower does not startBattery lowCharge the battery fully.
Uneven cuttingBlades dullSharpen or replace blades.
Boundary wire issuesWire damagedInspect and repair boundary wire.
Mower stops unexpectedlyRain sensor activatedWait for dry conditions to resume.

Reset: Use the app to reset settings if necessary.

Worx Landroid WR154E Lawn Mower Manual © - All Rights Reserved 2026