Worx Landroid WR155E Lawn Mower Manual

The Worx Landroid WR155E is an advanced robotic lawn mower designed to efficiently maintain your lawn with minimal effort. It features a cutting width of 22 cm, adjustable cutting heights, and a powerful battery that allows for up to 60 minutes of mowing on a single charge. The mower is equipped with smart technology, including a rain sensor, anti-collision system, and the ability to navigate complex garden layouts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Mowing Operation 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, and user manual.

Feature	Description
Cutting Width	22 cm for efficient mowing
Cutting Height	Adjustable from 20 mm to 60 mm
Battery Life	Up to 60 minutes on a single charge
Rain Sensor	Automatically returns to the charging station in rain
Anti-Collision System	Prevents damage by detecting obstacles
Smart App Control	Control and schedule mowing via smartphone app

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

Install boundary wire: Define the mowing area by laying out the boundary wire.
Connect the charging station: Plug into a power outlet and ensure it is secure.
Test the setup: Ensure the mower can navigate the defined area without issues.

WARNING! Ensure the area is free of obstacles before operation.

First-Time Setup

Power on the mower; follow the app prompts for initial setup.

Download the Worx Landroid app: Available on iOS and Android.
Connect the mower to Wi-Fi: Follow the app instructions to connect.
Set mowing schedule: Use the app to set preferred mowing times.

CAUTION! Ensure the mower is in a safe area during setup.

Specifications

Model: Worx Landroid WR155E.
Cutting Width: 22 cm.
Battery: Lithium-ion, 20V.
Charging Time: Approximately 90 minutes.
Area Coverage: Up to 500 m².
Weight: 9.5 kg.
Noise Level: 65 dB.

Controls and Settings

Access settings via the Worx Landroid app or the control panel on the mower.

Control Panel: Power button, manual control buttons, and status indicators.

Settings: Adjust cutting height, schedule mowing times, and check battery status through the app.

Connecting to the App

Ensure your smartphone is connected to the same Wi-Fi network as the mower.

Open the Worx Landroid app.
Select 'Add Device' and follow the prompts.
Ensure the mower is powered on and within range.

Tip: Keep the app updated for the best performance.

Mowing Operation

The mower will automatically start based on the scheduled times set in the app.

Press the power button to start manual operation.
Use the app to adjust settings during operation.
Monitor battery life and return to charging station as needed.

WARNING! Do not attempt to lift or move the mower while it is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for damage regularly.
Store the mower in a dry place during winter months.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate the mower in wet conditions.
Ensure the mower is properly maintained to avoid accidents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Uneven cutting	Blade wear	Inspect and replace blades if necessary.
Boundary wire not detected	Wire damage	Inspect boundary wire for breaks or damage.
Mower stops unexpectedly	Obstacle detected	Clear the area of obstacles and restart.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.