Worx Landroid WR165 Lawn Mower Manual

The Worx Landroid WR165 is an advanced robotic lawn mower designed for efficient grass cutting in residential lawns. With a cutting width of 7 inches and the ability to handle slopes up to 20 degrees, this mower is perfect for yards up to 1/4 acre. It features a rain sensor, adjustable cutting height, and a user-friendly app for remote control and scheduling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, rain sensor, adjustable cutting height, mobile app.

Feature	Description
Cutting Width	7 inches for efficient mowing
Battery Life	Up to 90 minutes of operation
Rain Sensor	Automatically returns to charging station in rain
Adjustable Cutting Height	1.5 to 4 inches for customized lawn care
Mobile App	Control and schedule mowing from your smartphone

Installation

Unpack and inspect contents. Set up the charging station in a dry, level area.

Install boundary wire: Define the mowing area by laying out the boundary wire.
Connect the charging station: Plug into a power outlet and ensure proper placement.
Test the setup: Ensure the mower can navigate the defined area without issues.

WARNING! Ensure all connections are secure and the area is clear of obstacles.

First-Time Setup

Power on the mower and follow the app instructions for initial setup.

Download the Worx Landroid app: Available on iOS and Android.
Connect to Wi-Fi: Follow prompts to connect the mower to your home network.
Set mowing schedule: Use the app to define your mowing preferences.

CAUTION! Ensure the mower is on a stable surface during setup.

Specifications

Model: Worx Landroid WR165.
Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Max Area: Up to 1/4 acre.
Charging Time: Approximately 90 minutes.
Weight: 20 lbs.
Dimensions: 24 x 20 x 10 inches.

Controls and Settings

Access settings via the mobile app or the control panel on the mower.

Control Panel: Power button, manual control buttons, status indicators.

Settings: Adjust cutting height, set schedules, and check battery status through the app.

Connecting to the App

Ensure the mower is powered on and within range of your Wi-Fi network.

Open the app and create an account.
Follow the prompts to connect the mower to your account.
Customize settings and schedules through the app interface.

Tip: Keep the app updated for the best performance.

Operating the Mower

Start mowing using the app or the control panel.

Press the start button or use the app to initiate mowing.
Monitor the mower's progress through the app.
Return to charging station when mowing is complete or battery is low.

WARNING! Do not obstruct the mower while in operation.

Maintenance

Regular maintenance ensures optimal performance.

Clean the mower: Remove grass clippings and debris after each use.
Check blades: Inspect and replace blades as needed.
Update software: Keep the mower's firmware updated via the app.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Keep children and pets away from the mowing area.
Do not operate in wet conditions.
Ensure the mower is properly maintained to prevent accidents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery issue	Check battery charge and connections.
Mower stops mid-operation	Boundary wire issue	Inspect boundary wire for breaks or disconnections.
Uneven cutting	Blade condition	Inspect and sharpen or replace blades as necessary.
App connection issues	Wi-Fi signal	Ensure mower is within range of Wi-Fi and restart the app.

Reset: Use the app to reset settings if needed.

Service: For support, contact Worx customer service.