Worx Landroid WR208 Lawn Mower Manual

The Worx Landroid WR208 is an innovative robotic lawn mower designed to maintain your lawn effortlessly. With advanced navigation technology, it can handle lawns up to 1/4 acre, cutting grass efficiently while avoiding obstacles. It features a weather-resistant design, adjustable cutting heights, and a user-friendly app for remote control and scheduling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Robotic mower, charging station, boundary wire, user manual, and mobile app.

Feature	Description
Smart Navigation	Efficiently navigates around obstacles and tight spaces.
Weather Resistant	Operates in light rain; designed for outdoor use.
Adjustable Cutting Height	Customizable cutting height for different grass types.
Mobile App Control	Schedule mowing sessions and monitor progress remotely.
Boundary Wire	Defines the mowing area to prevent off-limits cutting.

Installation

Unpack the mower and charging station. Follow these steps for installation:

Choose a suitable location for the charging station.
Install the boundary wire around the mowing area.
Connect the charging station to a power source.
Ensure the mower is fully charged before first use.

WARNING! Ensure the area is clear of obstacles before installation.

First-Time Setup

Power on the mower and follow the app instructions for setup.

Download the Worx Landroid app from your app store.
Create an account and connect to your mower via Bluetooth.
Set your mowing schedule and preferences in the app.
Test the mower to ensure it follows the boundary wire correctly.

CAUTION! Keep pets and children away during initial setup.

Specifications

Cutting Width: 7 inches.
Battery Type: Lithium-ion.
Battery Voltage: 20V.
Charging Time: Approximately 90 minutes.
Operating Time: Up to 60 minutes on a full charge.
Weight: 20 lbs.
Cutting Height: Adjustable from 1.5 to 4 inches.
Area Coverage: Up to 1/4 acre.

Controls and Settings

Access settings via the mobile app. Key controls include start/stop, scheduling, and cutting height adjustment.

Remote: Use the app for remote control and monitoring.

Connecting Devices

Connect the mower to your smartphone via Bluetooth for control and monitoring.

Ensure Bluetooth is enabled on your smartphone.
Open the Worx Landroid app and follow the pairing instructions.
Check for firmware updates in the app.

Tip: Keep the app updated for optimal performance.

Operating the Mower

To operate the mower, ensure it is charged and follow the scheduled times set in the app.

Press the start button or use the app to initiate mowing.
Monitor the mower's progress via the app.
Return to the charging station automatically when the battery is low.

WARNING! Do not obstruct the mower while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the mower blades after each use.
Check the boundary wire for any damage.
Store the mower indoors during extreme weather conditions.

CAUTION! Always turn off the mower before performing maintenance.

Safety Information

Read all safety instructions before operating the mower. Keep the area clear of debris and obstacles.

WARNING! This mower is not a toy; keep children and pets away during operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower does not start	Battery low	Charge the mower fully before use.
Uneven cutting	Blades dull	Sharpen or replace the blades as needed.
Boundary wire issues	Wire damaged	Inspect and repair the boundary wire.
Mower gets stuck	Obstacles in the way	Clear the area of debris and obstacles.

Reset: Use the app to reset settings if necessary.

Service: For support, contact Worx customer service.